系统设计原则在家具设计中的应用
作者：
杨子恒;喻云水
期刊：
设计 ,2021年34(15):90-93 ISSN：1003-0069
作者机构：
中南林业科技大学材料科学与工程学院;[杨子恒; 喻云水] 中南林业科技大学
关键词：
系统设计;家具设计;理性主义;工业产品;乌尔姆学院
摘要：
本文旨在探究如何利用系统设计原则来指导家具产品设计,首先对系统设计原则的产生背景、具体定义和现实意义进行阐述,再结合当代家具的设计需求,对这一理论的应用方法和优势进行了分析总结,同时列举了几个在这一理念指导下的经典家具产品案例,以期为今后的家具设计发展提供可借鉴的方法和参考案例。
语种：
中文
展开
针对室内设计的心智模型研究
作者：
王晔南;喻云水
期刊：
家具与室内装饰 ,2020年(12):118-120 ISSN：1006-8260
作者机构：
中南林业科技大学材料科学与工程学院,湖南长沙 410000;[王晔南; 喻云水] 中南林业科技大学
关键词：
心智模型;行为;需求;室内设计
摘要：
随着时代的不断发展,人们的物质及精神需求也在不断提高,以人为本的思想也逐渐深入人心。如何构建符合用户需求的宜居室内环境这个问题越来越被人们所关注,在此背景下室内设计师对于用户需求的准确预测与揣摩就显得尤为重要。文章通过概念、优势、方法等方面对心智模型进行剖析介绍,意在将其运用到室内设计中去,从而达到提高室内设计效率的目的。通过研究心智模型在针对于室内空间设计时的建立流程,探索室内设计中目标用户的需求,以此对用户需求挖掘做出理论指导。
语种：
中文
展开
基于需求分析的适老化卫浴柜研究
作者：
石晓雪;喻云水;杨作平
期刊：
家具与室内装饰 ,2020年(10):18-21 ISSN：1006-8260
作者机构：
中南林业科技大学材料科学与工程学院,湖南长沙 410004;广东雅科波罗橱柜有限公司,广东广州 510000;[喻云水; 石晓雪] 中南林业科技大学;[杨作平] 广东雅科波罗橱柜有限公司
关键词：
适老化设计;卫浴柜;自理型老人;用户需求;产品表现特征
摘要：
针对人口老龄化加剧带来的我国适老化家具部件体系不健全的问题,以适老化卫浴柜为研究对象,首先对其展开市场调研,探讨了适老化卫浴柜的整体环境;接着对自理型老年用户进行定位和分类,分析其生理和心理需求,将老年用户需求转换为产品表现特征;最后提出从柜体特征和辅助配件特征两条支线出发的适老化卫浴柜设计方法,分析其优势和特点,以此为相关企业适老化家居产品的研发提供参考思路,希望可以为老年群体的梳洗生活提供更好的服务保障。
语种：
中文
展开
Fabrication of α-Fe/Fe3C/woodceramic nanocomposite with its improved microwave absorption and mechanical properties
作者：
Zhou, Weihong* ;Yu, Yunshui;Xiong, Xueliang;Zhou, Sicong
期刊：
Materials ,2018年11(6):878 ISSN：1996-1944
通讯作者：
Zhou, Weihong
作者机构：
[Yu, Yunshui; Zhou, Sicong; Zhou, Weihong] Cent South Univ Forestry & Technol, Coll Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.;[Xiong, Xueliang] Changsha Res Inst Min & Met Ltd Co, Changsha 410004, Hunan, Peoples R China.
通讯机构：
[Zhou, Weihong] C;Cent South Univ Forestry & Technol, Coll Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
关键词：
Bending strength;Chlorine compounds;Complex networks;Compressive strength;Electric network analyzers;Fabrication;Fourier transform infrared spectroscopy;Mechanical properties;Nanocomposites;Nanoparticles;Scanning electron microscopy;X ray diffraction;Absorption property;Aqueous ammonia solution;Complex permeability;Complex permittivity;Fe3C;Structural characterization;Vector network analyzers;Woodceramic;Iron compounds
摘要：
Furan resin and fir powder pretreated by FeCl3 and aqueous ammonia solution were used to fabricate α-Fe/Fe3C/woodceramic nanocomposite. The bands of the pretreated wood powder were characterized by Fourier transform infrared spectroscopy (FTIR). The structural characterization of the nanocomposites was performed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The microwave absorption of the nanocomposites was measured by a vector network analyzer in the range of 2-18 GHz. The mechanical properties of the composites were also investigated. XRD and SEM results show that the α-Fe and Fe3C nanoparticles are in-situ generated and disperse in the matrix of the woodceramic. The diameters of these nanoparticles increase with the increasing of concentration of FeCl3 solution. The experimental results show that both the complex permittivity and the complex permeability of α-Fe/Fe3C/woodceramic nanocomposites increase as the concentration of FeCl3 solution increases. The composites pretreated with 0.60 mol·L-1 FeCl3 have the best absorption properties. The maximum value of reflection loss (RL) at 3 mm thickness reaches -25.60 dB at 10.16 GHz and the bandwidth below -10 dB is about 2.5 GHz. Compared to woodceramic, the bending strength and compressive strength of α-Fe/Fe3C/woodceramic nanocomposites increase by 22.5% and 18.7% at most, respectively. © 2018 by the authors.
语种：
英文
展开
纳米α-Fe/木陶瓷复合材料的结构表征与性能研究
作者：
周蔚虹;喻云水;洪宏;贾春华;邹栋英
期刊：
中南林业科技大学学报 ,2018年38(10):117-122 ISSN：1673-923X
作者机构：
中南林业科技大学材料科学与工程学院,湖南长沙,410004;[贾春华; 周蔚虹; 洪宏; 喻云水; 邹栋英] 中南林业科技大学
关键词：
木陶瓷;力学性能;导电性
摘要：
在呋喃树脂中加入不同质量百分数的纳米γ-Fe_2O_3,然后与毛竹竹粉混合、压制成型、高温烧结制备出纳米α-Fe/木陶瓷复合材料.分别采用X射线衍射仪(XRD)与扫描电子显微镜(SEM)对纳米α-Fe/木陶瓷复合材料的物相组成与成分分布与进行了表征,并对其抗弯强度与导电性能进行了研究.结果表明:(1)复合材料中存在的主要晶体相有石墨、α-Fe与Fe3C;(2)纳米α-Fe颗粒多数呈球形分散于木陶瓷基体中,当γ-Fe_2O_3添加量大于15% 时,生成的α-Fe粒子发生了比较明显的团聚;(3)纳米α-Fe/木陶瓷复合材料的抗弯强度随烧结温度的提高而增大,随纳米γ-Fe_2O_3添加量的增大先增加后减小,抗弯强度最大值为13.31MPa;(4)纳米 α-Fe/木陶瓷复合材料的导电性随烧结温度的提高而增大,随纳米γ-Fe_2O_3添加量的增大而增强.
语种：
中文
展开
Determining the curing parameters of furfuryl alcohol for wood modification by nanoindentation
作者：
Li, Wanju;Zhang, Xue Xia;Yu, Zixuan;Yu, Yun Shui;Yu, Yan*
期刊：
European Journal of Wood and Wood Products ,2017年75(1):81-87 ISSN：0018-3768
通讯作者：
Yu, Yan
作者机构：
[Yu, Zixuan; Yu, Yan; Li, Wanju; Zhang, Xue Xia] Int Ctr Bamboo & Rattan, Dept Biomat, Beijing, Peoples R China.;[Yu, Zixuan; Yu, Yan; Li, Wanju; Zhang, Xue Xia] SFA & Beijing Cobuilt Key Lab Bamboo & Rattan Sci, Beijing, Peoples R China.;[Yu, Yun Shui] Cent South Univ Forestry & Technol, Coll Mat, Changsha, Hunan, Peoples R China.
通讯机构：
[Yu, Yan] I;[Yu, Yan] S;Int Ctr Bamboo & Rattan, Dept Biomat, Beijing, Peoples R China.;SFA & Beijing Cobuilt Key Lab Bamboo & Rattan Sci, Beijing, Peoples R China.
关键词：
Elastic Modulus;Maleic Anhydride;Maleic Anhydride;Equilibrium Moisture Content;Furfuryl Alcohol
摘要：
Wood furfurylation is a very promising modification process, which can greatly improve several important properties of wood simultaneously. The polymerization degree of furfuryl alcohol (FA) in wood significantly influences the performances of modified wood. However, it is normally time-consuming and expensive to determine the curing parameters of a new FA solution formula for a target wood species, as the process requires lots of lab-scale experiments. To address this challenge, nanoindentation was used to determine the hardness and elastic modulus of FA resin which are cured with different catalyst content, curing time and curing temperature, assuming that these mechanical properties should closely relate to the polymerization degree of cured FA (resin). Single-factor experiments were designed to obtain preliminary curing parameters. Three key curing parameters were selected, namely the catalyst content of maleic anhydride (1.5, 3, 5%), curing time (2, 3, 4, 5, 6h) and curing temperature (95, 105, 115, 125°C). The proposed set of curing parameters based on the nanoindentation results are 3% maleic anhydride, 3h curing time and 105°C curing temperature. This set of parameters was slightly modified and then used as the starting process parameters for Masson pine modification, which resulted in greatly improved wood properties. Therefore, the method proposed in this study offers an effective and time-saving means of developing new processes of wood furfurylation. © 2016, Springer-Verlag Berlin Heidelberg.
语种：
英文
展开
粘度法测定竹材薄壁组织和维管束中纤维素的分子量
作者：
洪宏;周蔚虹;喻云水;贾春华
期刊：
中南林业科技大学学报 ,2017年37(1):112-117 ISSN：1673-923X
作者机构：
中南林业科技大学材料科学与工程学院, 湖南, 长沙, 410004;中南林业科技大学材料科学与工程学院, 竹业湖南省工程研究中心, 湖南, 长沙, 410004;[洪宏; 周蔚虹; 贾春华] 中南林业科技大学材料科学与工程学院, 湖南, 长沙, 410004;[喻云水] 中南林业科技大学材料科学与工程学院, 竹业湖南省工程研究中心, 湖南, 长沙, 410004
关键词：
薄壁组织;维管束;粘度;分子量
摘要：
为测定竹材薄壁组织和维管束中纤维素的分子量,通过从毛竹中分离出薄壁组织和维管束,分别从中提取出纤维素,采用铜乙二胺(CED)粘度法再对两组织中提取出的PTC和VBC分子量进行测定。结果表明: VBC分子聚合度为1 001,粘均分子量达到1.6×10~5,远高于PTC分子;将得到的结果与XRD测定结果对比,表明测得的VBC结晶度为67.9%,大于PTC的60.3%,纤维素大分子的晶区比例(结晶度)随着纤维素分子量的增加而增大。因此,维管束更适于作为制取竹纤维的原料。
语种：
中文
展开
竹材薄壁组织和维管束理化性质比较分析
作者：
贾春华;洪宏;喻云水;周蔚虹
期刊：
中南林业科技大学学报 ,2016年36(7):116-122 ISSN：1673-923X
作者机构：
中南林业科技大学材料科学与工程学院, 湖南, 长沙, 410004;中南林业科技大学材料科学与工程学院, 竹业湖南省工程研究中心, 湖南, 长沙, 410004;[贾春华; 洪宏; 周蔚虹] 中南林业科技大学材料科学与工程学院, 湖南, 长沙, 410004;[喻云水] 中南林业科技大学材料科学与工程学院, 竹业湖南省工程研究中心, 湖南, 长沙, 410004
关键词：
竹材;薄壁组织;维管束;纤维素;半纤维素;木质素
摘要：
从竹材中分离出薄壁组织和维管束,利用SEM、TG、XRD分析手段对分离出来两组织的化学组分含量、形貌特征、吸湿性、热稳定性及结晶性做了相应的比较分析研究。结果表明:薄壁组织主要成分为半纤维素,维管束的主要成分为纤维素:SEM图片显示薄壁组织为方形胞腔状,质地疏松易碎,维管束呈纤维束状,相互紧密排列;吸湿性测定结果表明,由于薄壁组织疏水性内含物含量高,而维管束亲水性羟基相对比例较高,使得吸湿能力维管束比薄壁组织要显著;TG分析表明维管束热稳定性较好,热解所需活化能较高;XRD表征结果显示薄壁组织的相对结晶度要比维管束低7.8%。
语种：
中文
展开
Optimization of mechanical properties of bamboo plywood
作者：
Yu, Y. S.;Ni, C. Y.;Yu, T.;Wan, H.*
期刊：
Wood and Fiber Science ,2015年47(1):109-119 ISSN：0735-6161
通讯作者：
Wan, H.
作者机构：
[Ni, C. Y.; Yu, Y. S.] Cent South Univ Forestry & Technol, Sch Mat Sci & Engn, Changsha 410083, Hunan, Peoples R China.;[Yu, T.] Cent South Univ Forestry & Technol, Sch Math & Stat, Changsha 410083, Hunan, Peoples R China.;[Wan, H.] Mississippi State Univ, Dept Sustainable Bioprod, Mississippi State, MS 39762 USA.
通讯机构：
[Wan, H.] M;Mississippi State Univ, Dept Sustainable Bioprod, Mississippi State, MS 39762 USA.
关键词：
Bamboo plywood;mechanical property;MOR;MOE;design optimization;response surface methodology;Pareto genetic algorithm
摘要：
This study describes a process to apply response surface methodology (RSM) together with a niched Pareto genetic algorithm for optimization of the mechanical properties of bamboo plywood. Experiments were carried out to investigate the dependences of parallel and perpendicular modulus of rupture (MOR) and modulus of elasticity (MOE) of bamboo plywood on hot-pressing temperature, hot-pressing time, pressure, amount of adhesive, and moisture content. Empirical equations were presented to describe the dependences. Orthogonal tests and RSM were used to establish models for MOE and MOR of bamboo plywood in the parallel and perpendicular directions. Solutions of the models were obtained by means of a Pareto genetic algorithm. By comparing the solutions with given initial values, the optimized parallel and perpendicular MOR were increased by 19.52 and 23.35%, respectively, and the optimized parallel and perpendicular MOE by 21.50 and 12.57%, respectively. Based on the optimization, typical panel operational parameters were hot-pressing temperature 163.3 degrees C, hot-pressing time 17.6 min, hot-pressing pressure 4.0 MPa, amount of adhesive 8.9%, and MC 15.7%. Results from this study are useful to bamboo plywood mills for selecting operational parameters to determine mechanical properties of bamboo plywood, which will decrease workload and time in determining technical parameters to manufacture bamboo plywood with expected MOE and MOR.
语种：
英文
展开
Wood modification with furfuryl alcohol catalysed by a new composite acidic catalyst
作者：
Li, Wanju;Wang, Hankun;Ren, Dan;Yu, YunShui;Yu, Yan*
期刊：
Wood Science and Technology ,2015年49(4):845-856 ISSN：0043-7719
通讯作者：
Yu, Yan
作者机构：
[Ren, Dan; Wang, Hankun; Yu, Yan; Li, Wanju] Int Ctr Bamboo & Rattan, Dept Biomat, Beijing, Peoples R China.;[Yu, YunShui] South Eastern Forestry Sci & Technol Univ, Coll Mat, Changsha, Hunan, Peoples R China.;[Yu, Yan] SFA & Beijing Cobuilt Key Lab Bamboo & Rattan Sci, Beijing, Peoples R China.
通讯机构：
[Yu, Yan] I;Int Ctr Bamboo & Rattan, Dept Biomat, Beijing, Peoples R China.
关键词：
Maleic Anhydride;Equilibrium Moisture Content;Furfuryl Alcohol;Weight Percent Gain;Wood Cell Wall
摘要：
Due to its potential for commercial applications, wood modification with furfuryl alcohol (FA) is now attracting enhanced attentions from researchers and industry. Selection of suitable catalysts to control the polymerization of FA during storage and curing is the most crucial component of this technology. In this paper, a new composite acidic catalyst composed of oxalic acid and citric acid was proposed and compared with the widely adopted maleic anhydride catalyst, with Masson pine (Pinus massoniana Lamb) as the objective of modification. Weight percent gain, equilibrium moisture content, anti-swelling efficiency, modulus of rupture, modulus of elasticity and parallel-to-grain compressive strength (CS), as well as resistance to mould and decay fungi were all evaluated. The results show that furfurylation significantly improves the dimensional stability and durability of pine wood. Furthermore, most of the mechanical properties were also enhanced, especially CS, which increased by approximately 79 and 95 % under the two respective catalysts. Overall, the newly proposed composite acidic catalyst produced comparable results to maleic anhydride with much less FA required.
语种：
英文
展开
毛竹薄壁组织抽提物成分的GC-MS分析
作者：
洪宏;喻云水;周蔚虹;李本贵
期刊：
中南林业科技大学学报 ,2015年35(6):114-117,123 ISSN：1673-923X
作者机构：
[洪宏; 喻云水; 周蔚虹] 中南林业科技大学材料科学与工程学院;[李本贵] 竹业湖南省工程研究中心
关键词：
毛竹;薄壁组织;抽提物;GC-MS分析
摘要：
通过物理分离的方法从新鲜毛竹中分离出薄壁组织，利用索氏抽提的方法提取薄壁组织中的化学成分，采用气相色谱 - 质谱 （GC-MS） 联用技术对抽提物成分进行分析。经分析鉴定，毛竹薄壁组织苯 / 醇抽提物经色谱分离可以得到 40 个峰，可以检测出其中的 34 种抽提物成分，占色谱峰总流出峰面积的 91.75%; 其主要化学组分为酯类 6 种、酮类 7 种和醇类 5 种，分别占物质总量的 39.94%、25.72% 和 8.74%；主要化学物质为：邻苯二甲酸二丁酯（19.26%）、邻苯二甲酸二异辛酯（14.91%）、4- 羟基 -4- 甲基 -2- 戊酮（8.76%）、（3E,5Z）-6,10-二甲基 -3,5,9- 十一碳三烯 -2- 酮（8.11%）、苯乙烯（5.09%）、芳樟醇（4.99%）。
语种：
中文
展开
极限压剪状态下铅芯橡胶支座应力分析
作者：
洪宏;周蔚虹;喻云水;贾春华
期刊：
建筑科学 ,2015年31(9):83-87 ISSN：1002-8528
作者机构：
郑州大学土木工程学院,河南郑州,450001;宁波工程学院建筑工程学院,浙江宁波,315211;[王建强; 辛伟; 李政] 郑州大学;[赵卓] 宁波工程学院
关键词：
铅芯橡胶支座;有限元分析;极限压剪状态;应力分析
摘要：
采用ABAQUS对铅芯橡胶支座进行模拟分析,研究支座在极限压剪状态下的应力分布,分析表明:极限压剪状态下钢片层中的拉应力S11和S22、压应力S33及切应力S12对钢片层Mises等效应力的影响较大;支座有效承压区内大部分钢片层中有部分区域的Mises等效应力超过了其屈服强度,产生了屈服;支座内部各橡胶层的Mises等效应力较小,橡胶未发生破坏。
语种：
中文
展开
Selected Properties of Corrugated Particleboards Made from Bamboo Waste (Phyllostachys edulis) Laminated with Medium-Density Fiberboard Panels
作者：
Yang, Feng;Fei, Benhua;Wu, Zhengxin;Peng, Liang;Yu, Yunshui*
期刊：
BIORESOURCES ,2014年9(1):1085-1096 ISSN：1930-2126
通讯作者：
Yu, Yunshui
作者机构：
[Fei, Benhua; Yang, Feng] State Forestry Adm China, Dept Biomat, Int Ctr Bamboo & Rattan, Beijing 100102, Peoples R China.;[Wu, Zhengxin; Yu, Yunshui; Yang, Feng] Cent South Univ Forestry & Technol, Sch Mat Sci & Engn, 498 Shaoshan South Rd, Changsha 410004, Hunan, Peoples R China.;[Peng, Liang] Chinese Acad Forestry, Hunan Inst, Changsha 410004, Hunan, Peoples R China.
通讯机构：
[Yu, Yunshui] C;Cent South Univ Forestry & Technol, Sch Mat Sci & Engn, 498 Shaoshan South Rd, Changsha 410004, Hunan, Peoples R China.
关键词：
Corrugated urea formaldehyde-bonded particleboard;Dimensional stability;Echanical properties;Moso bamboo;Planer waste
摘要：
A simple, practical, and low-technology approach was developed to fabricate corrugated bamboo particleboards (CBP), a novel bamboo product with a corrugated structure, from bamboo waste (planer waste). This product could be manufactured anywhere in the world where the bamboo industry develops. The selected mechanical and physical properties of CBP were prepared with urea formaldehyde resin at three press temperatures and two density levels and were evaluated. The results showed that the performance of CBPs is highly dependent upon the board density. The static bending strength of CBP laminated with MDF initially increases, and then decreases with increasing press temperature. Increasing the magnitude of the press temperature has a slightly positive effect on the thickness swelling and water absorption. Compared with the excellent mechanical strength of CBP (laminated with MDF), the thickness swelling value of this bamboo-based particleboard without any waterproofing treatment was lower than the minimal requirement of the EN standard.
语种：
英文
展开
竹质建筑结构柱抗压性能的研究
作者：
刘学;喻云水;周蔚虹
期刊：
中南林业科技大学学报 ,2013年33(1):104-108 ISSN：1673-923X
作者机构：
[刘学; 喻云水; 周蔚虹] 中南林业科技大学材料科学与工程学院;竹业湖南省工程研究中心
关键词：
竹质建筑结构柱;慈竹;竹帘胶合板;抗压性能
摘要：
利用竹胶合板与L型钢制备用于竹结构房屋支撑作用的竹质建筑结构柱,采用双向刀铰与500吨长柱试验机对其进行静态抗压测试,测量结构柱抗压性能,观察其在轴向压力作用下的压缩、弯曲变形,分析竹帘胶合板力学性能、连接方式、破坏形式等对结构柱力学性能的影响。结果表明:竹质建筑结构柱结构柱破坏荷载为700 kN,抗压强度为33.26 MPa;竹质建筑结构柱端部出现局部受压破坏;竹质建筑结构柱翼缘与侧板之间的螺钉连接强度不高,两者之间所受剪力不能有效传递。
语种：
中文
展开
Influence of carbonization temperature on the microstructure and properties of woodooceramics
作者：
Zhou, Weihong* ;Yu, Yunshui;Xiong, Xueliang
期刊：
Advanced Materials Research ,2012年356-360:382-385 ISSN：1022-6680
通讯作者：
Zhou, Weihong
作者机构：
[Yu, Yunshui; Zhou, Weihong] Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.;[Xiong, Xueliang] Changshan Res Inst Min & Met, Changsha PT-410004, Peoples R China.
通讯机构：
[Zhou, Weihong] C;Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
会议名称：
International Conference on Energy, Environment and Sustainable Development (ICEESD 2011)
会议时间：
OCT 21-23, 2011
会议地点：
Shanghai Univ Elect Power, Shanghai, PEOPLES R CHINA
会议主办单位：
Shanghai Univ Elect Power
会议论文集名称：
Advanced Materials Research
关键词：
Bamboo powder;Carbonization temperature;Furane resin;Woodceramics
摘要：
Microstructures of woodceramics were performed by scanning electron microscopy (SEM) and X-ray diffraction(XRD). The effect of carbonization temperature on carbon yield ratio, volume shrinkage ratio and volume electrical resistivity of woodceramics were investigated. The results show that carbonization temperature has a significant effect on the microstructure of woodceramics. The volume shrinkage ratio increases, and the carbon yield ratio and the volume electrical resistivity decrease, as the carbonization temperature increases. ©(2012) Trans Tech Publications, Switzerland.
语种：
英文
展开
Study on Fe/Woodceramics composites
作者：
Zhou, Weihong* ;Yu, Yunshui
期刊：
Proceedings of 2012 International Conference on Biobase Material Science and Engineering, BMSE 2012 ,2012年:52-55
通讯作者：
Zhou, Weihong
作者机构：
[Yu, Yunshui; Zhou, Weihong] Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
通讯机构：
[Zhou, Weihong] C;Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
会议名称：
International Conference on Biobase Material Science and Engineering
会议时间：
OCT 21-23, 2012
会议地点：
Changsha, PEOPLES R CHINA
会议主办单位：
[Zhou, Weihong;Yu, Yunshui] Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
关键词：
Fe/ woodceramics composites;ferric salt;alkali;volume electrical resistivity
摘要：
Fe/Woodceramics(Fe/WCMs) composites are prepared by dipping bamboo powder into ferric salt solution, dropping alkali, mixing with furane resin, and then having the mixture molded and finally sintered in high temperature. Microstructures of Fe/WCMs are measured by using X-ray diffraction(XRD) and scanning electron microscopy (SEM). XRD results indicate that the characteristic peaks of Fe are found. SEM photographs show that Fe crystals are distributed in the glassy carbon. The effects of concentration of ferric salt on volume shrinkage ratio and volume electrical resistivity of the composites are investigated. The results show that the volume shrinkage ratio and the volume electrical resistivity decrease with an increase in concentration of ferric salt. ©2012 IEEE.
语种：
英文
展开
竹质工字梁抗弯性能的研究
作者：
喻云水;周蔚虹;刘学
期刊：
中南林业科技大学学报 ,2012年32(1):154-156,160 ISSN：1673-923X
作者机构：
[喻云水; 周蔚虹; 刘学] 中南林业科技大学材料科学与工程学院;竹业湖南省工程研究中心
关键词：
竹质工字梁;慈竹;竹帘胶合板;力学性能
摘要：
竹质工字梁是将慈竹竹帘胶合板锯裁成翼缘板与腹板后,通过等边角钢用螺钉联接而成。采用两端简支,在梁跨方向三分点处进行两点加载试验,量测竹质工字梁的应变和变形。结果表明:工字梁翼缘与腹板之间的螺钉连接可靠性与有效性不高,腹板边缘与翼缘之间的剪力不能有效传递;腹板端部发生剪切破坏,腹板受拉区发生裂缝。
语种：
中文
展开
竹粉/高密度聚乙烯复合材料性能研究
作者：
周钢;喻云水;吴庆定;姚静
期刊：
中南林业科技大学学报 ,2012年32(1):113-116 ISSN：1673-923X
作者机构：
[周钢; 喻云水; 吴庆定; 姚静] 中南林业科技大学材料科学与工程学院;竹业湖南省工程研究中心
关键词：
竹粉;高密度聚乙烯;复合材料;性能研究
摘要：
研究了竹粉/高密度聚乙烯(HDPE)复合材料的生产工艺,对其多项性能进行测试。采用双辊开炼机进行复合材料的共混制备;熔融指数仪测定不同配比复合材料的流动性;注塑成型机制备各种标准力学性能试样;拉力试验机和冲击试验机测试力学性能。结果表明随着竹粉含量的增加,材料熔融流动性大大降低;冲击强度下降明显;拉伸强度首先上升,在竹粉含量超过30%后又下降;注塑成型制品收缩率下降。
语种：
中文
展开
Research on mechanical properties of Bambusa distegia thread plywood
作者：
Yu, Yunshui* ;Zhou, Weihong;Liu, Xue;Xiong, Xueliang
期刊：
Advanced Materials Research ,2012年482-484:1394-1397 ISSN：1022-6680
通讯作者：
Yu, Yunshui
作者机构：
[Liu, Xue; Yu, Yunshui; Zhou, Weihong] Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.;[Xiong, Xueliang] Changsha Res Inst Min & Met Co Ltd, Changsha 410004, Hunan, Peoples R China.
通讯机构：
[Yu, Yunshui] C;Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
会议名称：
3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012)
会议时间：
MAR 27-29, 2012
会议地点：
Xiamen, PEOPLES R CHINA
会议主办单位：
[Yu, Yunshui;Zhou, Weihong;Liu, Xue] Cent South Univ Forestry & Technol, Dept Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.^[Xiong, Xueliang] Changsha Res Inst Min & Met Co Ltd, Changsha 410004, Hunan, Peoples R China.
会议论文集名称：
Advanced Materials Research
关键词：
Bamboo thread plywood;Bambusa distegia;Hot pressing pressure;Mechanical properties
摘要：
Bambusa distegia were used to make bamboo thread plywood by the process of producing thread, dipping thread into glue, assembling pattern and pressing. Influence of hot pressing pressure on mechanical properties of bambusa distegia thread plywood was investigated, which was 2.0MPa, 2.5MPa, 3.0MPa, 3.5MPa and 4.0MPa respectively. The results indicate that the modulus of rupture(MOR), modulus of elasticity(MOE), compressive strength(CS), and horizontal shear strength(HSS) increase with the increasing of hot pressing pressure. Mechanical properties of the Bambusa distegia thread plywood are higher than the indices of plywood for concrete form and the indices of plywood for container flooring. ©(2012) Trans Tech Publications, Switzerland.
语种：
英文
展开
木材糠醇树脂改性研究现状与展望
作者：
何莉;余雁;喻云水;田根林;王汉坤
期刊：
世界林业研究 ,2012年25(1):35-39 ISSN：1001-4241
作者机构：
[何莉; 喻云水] 中南林业科技大学材料学院;[余雁; 田根林; 王汉坤] 国际竹藤网络中心生物质材料研究室
关键词：
木材改性;糠醇;糠醇树脂改性
摘要：
对木材进行糠醇树脂改性能够显著提高木材尺寸稳定性、抗生物及化学侵蚀性和硬度,降低平衡含水率。木材糠醇树脂改性研究近10年来重新得到关注,并已在欧洲开始商业化生产,而国内还未见相关研究报道。文中简要介绍糠醇的性质和用途,详细阐述国外木材糠醇树脂改性的研究进展、成果和商业化情况,并对未来研究方向和重点提出自己的看法和见解。
语种：
中文
展开
