Punch die design of air filter holder part based on CAE technology
作者：
Zhou, Jian* ;Li, Li-jun;Lin, Wei-jian;Hu, Yi-hua
期刊：
Proceedings of 2012 International Conference on Biobase Material Science and Engineering, BMSE 2012 ,2012年:329-332
通讯作者：
Zhou, Jian
作者机构：
[Zhou, Jian; Li, Li-jun] Ctr South Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.;[Lin, Wei-jian; Hu, Yi-hua] Guangxi Univ Technol, Liuzhou Guangxi 545616, Peoples R China.
通讯机构：
[Zhou, Jian] C;Ctr South Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.
会议名称：
International Conference on Biobase Material Science and Engineering
会议时间：
OCT 21-23, 2012
会议地点：
Changsha, PEOPLES R CHINA
会议主办单位：
[Zhou, Jian;Li, Li-jun] Ctr South Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.^[Lin, Wei-jian;Hu, Yi-hua] Guangxi Univ Technol, Liuzhou Guangxi 545616, Peoples R China.
关键词：
Part graph;Extension size;Force;Assemble
摘要：
For getting high quality air holder part, its' shape and demand are analysised, then determining the technology route, each procedure's extension size and the relative force are calculated, then the assemble of dies could be obtained. Thus CAD/CAE technology could reduce dies' design time and cost. ©2012 IEEE.
语种：
英文
展开
油茶果采摘机采摘机械臂的机构设计及运动仿真
作者：
高自成;李立君;刘银辉
期刊：
西北林学院学报 ,2012年27(2):266-268 ISSN：1001-7461
作者机构：
[高自成; 李立君; 刘银辉] 中南林业科技大学机电工程学院
关键词：
油茶果;采摘机;采摘臂;机构设计;仿真
摘要：
油茶是我国重要的林业经济植物,是我国食用油的重要来源之一,随着品种的优化和种植的规范化,油茶果机械化采摘成为必然,研制油茶果采摘机成为林业机械的一个新领域。在实地考察研究油茶果植物特性和采摘方式的基础上,设计了油茶果采摘机采摘臂的机构,并应用三维软件pro/e,针对采摘臂的液压驱动方式,对采摘臂进行了运动仿真。
语种：
中文
展开
油茶果采摘机输送液压马达动态特性研究——基于matlab/simulink
作者：
刘浩;徐学林;李立君;刘银辉;左二兵
期刊：
农机化研究 ,2012年34(7):32-35 ISSN：1003-188X
作者机构：
中南林业科技大学机电工程学院,长沙,410004
关键词：
油茶果;采摘机;液压马达;动态仿真
摘要：
输送液压马达提供了油茶果采摘机输送系统的动力,其动态性能对输送系统的稳定性有较大影响.为此,以液压马达的流量连续性方程以及力矩平衡方程为研究基础,运用MATLAB/Simulink软件建立其动态仿真模型,根据马达型号代入相关参数后仿真验证模型的准确性并分析输送系统的动态特性.
语种：
中文
展开
基于偏好人工免疫网络多特征融合的油茶果图像识别
作者：
李昕;李立君;高自成;周健;闵淑辉
期刊：
农业工程学报 ,2012年28(14):133-137 ISSN：1002-6819
通讯作者：
Li, L.(junlili1122@163.com)
作者机构：
[李立君; 闵淑辉; 周健; 高自成; 李昕] School of Mechanical and Electrical Engineer, Center South University of Forestry and Technology, Changsha 410004, China
通讯机构：
School of Mechanical and Electrical Engineer, Center South University of Forestry and Technology, China
关键词：
机器视觉;图像处理;特征识别;偏好人工免疫网络;油茶果;采摘机器人
摘要：
为提高油茶果采摘机器人机器视觉的识别率,该文提出了基于偏好人工免疫网络识别的油茶果多特征融合识别方法。在对油茶果图像进行处理的基础上,提取待识别目标区域的颜色特征、形态特征、纹理特征进行聚类,并提取典型油茶果多特征作为偏好抗体,使多特征参数在偏好免疫算法中进行有效融合。仿真试验结果表明,多特征融合的识别方法对油茶果果实的识别率在晴天时达到了90.15%,阴天时达到了93.90%。而时间复杂度基本不变,取得了较好的识别效果,该研究可为下一步油茶果采摘机器人智能采摘提供参考。
语种：
中文
展开
Agriculture auto workpiece injection mold design based on CAE
作者：
Zhou Jian* ;Li Lijun;Yan Yonglin;Wang Zhiwen;Zhou Dongcheng
期刊：
Materials Science Forum ,2012年704-705:308-312 ISSN：0255-5476
通讯作者：
Zhou Jian
作者机构：
[Li Lijun; Zhou Jian; Yan Yonglin] Ctr S Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.;[Wang Zhiwen] Guangxi Univ Technol, Dept Comp, Liuzhou 545006, Peoples R China.;[Zhou Dongcheng] Telecom Corp Changning, Hunan Province 421500, Peoples R China.
通讯机构：
[Zhou Jian] C;Ctr S Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.
会议名称：
6th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS)
会议时间：
NOV 16-19, 2010
会议地点：
Guilin Univ Elect Technol, Guilin, PEOPLES R CHINA
会议主办单位：
Guilin Univ Elect Technol
会议论文集名称：
Materials Science Forum
关键词：
Gating System;Injection Mold;Liquid Flowing System Analysis;Parting Surface
摘要：
For reducing the mold manufacturing time as soon as possible, CAE technology is used to build work-piece three-dimensional draw, parting surface, gating system is designed, the mold's moving process being simulated, especially liquid flowing system is emulated. If the parameters are set reasonable, the ideal mold can be made. ©(2012) Trans Tech Publications.
语种：
英文
展开
基于Pro/E的油茶果采摘机设计
作者：
刘银辉;李立君;刘浩;左二兵
期刊：
农机化研究 ,2012年34(7):97-99 ISSN：1003-188X
作者机构：
中南林业科技大学机电工程学院,长沙,410004;[刘浩; 刘银辉; 左二兵; 李立君] 中南林业科技大学
关键词：
采摘机;三维实体建模;虚拟装配;干涉检查
摘要：
根据油茶果采摘工作环境和特性要求,设计了一个有效的油茶果采摘机,并对其主要部件进行了详细设计；利用Pro/E软件对各零部件进行了三维实体建模和整机虚拟装配,并对机构进行了静态和动态干涉检查.检查结果表明:机构运动和整机装配没有发生干涉现象,机构运动和参数选择达到设计要求.
语种：
中文
展开
创新教育在林农院校机械类研究生培养过程的思考
作者：
李立君;周健
期刊：
中南林业科技大学学报(社会科学版) ,2012年6(3):141-145 ISSN：1673-9272
作者机构：
中南林业科技大学机电工程学院,湖南长沙,410004;[李立君; 周健] 中南林业科技大学
关键词：
林农机械;研究生培养;创新;实践
摘要：
根据林农院校机械类的特点,阐述了林农院校机械类研究生创新的内涵,提出了培养该领域创新型研究生的一些方法：在招生制度上注重兴趣生的选拔,在培养过程中,实行导师组负责制,重视跨学科课程的学习,采取生动活泼的教学方式,建立自由的学术环境,提倡研究生学位论文自主选题,特别加强学生的实践,重视知识积累和总结。最后总结了思维基本原则,从而达到＂授之以渔＂目的。
语种：
中文
展开
基于核聚类的近邻人工免疫网络算法研究
作者：
李昕;李立君;高自成
期刊：
计算机应用研究 ,2012年29(7):2464-2466 ISSN：1001-3695
作者机构：
[李昕; 李立君; 高自成] 中南林业科技大学 机电工程学院
关键词：
人工免疫网络;近邻aiNet;核函数;区域生长
摘要：
针对经典人工免疫网络(aiNet)及改进算法中存在的运算时间长、结构复杂等问题,提出了一种改进的核聚类近邻人工免疫网络算法(KN-aiNet)。算法在aiNet的改进算法——近邻aiNet结构的基础上,以抗体数据为核心利用量子能级思想聚类,并重定义了生成抗体策略,采用区域生长法搜索拥挤距离,采用基于核函数的亲和度等方法来提高算法的聚类效果和降低算法的运算时间。聚类实验结果表明,KN-aiNet算法的聚类准确率较经典aiNet算法及近邻aiNet算法分别提高了11.53%和4.56%,而算法的运算时间较经典aiNet算法及近邻ai-Net算法分别下降了0.503 s和0.823 s。
语种：
中文
展开
油茶果采摘机工作空间的分析及优化
作者：
左二兵;李立君;高自成;刘银辉;李昕
期刊：
中南林业科技大学学报 ,2012年32(5):191-194 ISSN：1673-923X
作者机构：
中南林业科技大学机电工程学院,湖南长沙,410004;[刘银辉; 李昕; 左二兵; 李立君; 高自成] 中南林业科技大学
关键词：
采摘机;工作空间优化;蒙罗卡洛法;仿真分析
摘要：
油茶果采摘机是工作在非结构环境下的机械系统,结合油茶树的生物学特性和栽培方式等因素,利用边界法求解采摘机执行机构的工作空间,建立以满足采摘机作业空间最小、各臂臂长之和最小为优化目标,得到优化后的执行机构结构参数;在求出执行机构位移正解的基础上,基于matlab蒙罗卡洛法对采摘机的工作空间进行仿真与分析,验证了采摘机结构参数设计的合理性。
语种：
中文
展开
基于工程目标训练的金工实习教学实践探索
作者：
廖凯;李立君;胡劲松;魏德强
期刊：
农业工程与装备 ,2012年39(09):162-163 ISSN：2096-8736
作者机构：
中南林业科技大学机电工程学院,湖南长沙410083;桂林电子科技大学,广西桂林541004;中南林业科技大学机电工程学院,湖南长沙,410083;桂林电子科技大学,广西桂林,541004
关键词：
工程目标;工程训练;金工实习;实践教学
摘要：
针对我国高等工科院校培养的毕业生普遍存在工程实践训练(金工实习)不足,实践能力和创新能力不够的问题,借鉴国外“大工程”教育观和工程科技人才培养模式,紧密结合未来创新型、综合型、工程型高素质科技人才所需要的能力素质,在高校中探索以工程目标为教学导向的实习教学模式,为工科学生提供逼真的工程实训模式.
语种：
中文
展开
基于偏好免疫网络的油茶果采摘机器人图像识别算法
作者：
李立君;李昕;高自成;周健;闵淑辉
期刊：
农业机械学报 ,2012年43(11):209-213 ISSN：1000-1298
通讯作者：
Li, L.(junlili1122@163.com)
作者机构：
[闵淑辉; 李昕; 周健; 高自成; 李立君] College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, Changsha 410004, China
通讯机构：
College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, China
关键词：
油茶果;采摘机器人;偏好人工免疫网络;图像识别
摘要：
针对油茶果采摘机器人视觉识别中外界物体的形态学特性要求,采用了偏好人工免疫网络算法作为机器视觉的图像识别算法,并根据采摘环境及采摘对象的特点对算法结构进行了改进,增强了算法的识别率。仿真实验表明,采用偏好人工免疫网络算法对油茶果的识别率在晴天时达到了81.67%,阴天时达到了87.69%,满足采摘识别率的要求。
语种：
中文
展开
基于CAE鼠标浇口与流道平衡设计关系
作者：
周健;张亚国;李立君
期刊：
机械设计与制造 ,2012年(7):22-24 ISSN：1001-3997
作者机构：
中南林业科技大学机电学院,长沙,410004;TCL空调器(中山)有限公司,中山,528427
关键词：
鼠标浇注系统;优化;MOLDFLOW模拟
摘要：
当鼠标上下盖两个塑料件同时一模注塑成形时,容易产生填充不平衡等缺陷,为了获得良好的鼠标塑件质量,需要对其浇注系统进行优化。用MOLDFLOW先对鼠标的盖面网格进行划分,创建原始浇注系统,进行填充分析并显示结果,从而对原始浇注系统进行优化。通过多次迭代达到收敛要求后,浇口选用堆切式,并确定浇注系统各浇口的具体尺寸。通过优化后对流道进行平衡分析,结果显示充填时间和充填压力均可满足要求,从而说明MOLDFLOW模拟设计鼠标浇注系统可行。
语种：
中文
展开
Study of Innovative Education Method of Machinery Postgraduates of Forestry College
作者：
Lijun Li;Jian Zhou;Shaobo Peng
作者机构：
[Lijun Li; Jian Zhou; Shaobo Peng] Machinery and Electrical Engineering College of Centre South University of Forestry and Technology
会议名称：
2012 2nd International Conference on Education and Education Management(EEM 2012)
会议时间：
2012-09-04
会议地点：
Hong Kong,China
摘要：
According to the properties of machinery postgraduates of forestry college,the article points out the innovative meaning,also concludes some methods for cultivating innovation-style postgraduates.The
语种：
英文
展开
Characterization and thermal properties of the microencapsulated PCM slurry
作者：
Zhang, Yanlai* ;Rao, Zhonghao;Wang, Shuangfeng;Zhang, Hong;Li, Lijun;...
期刊：
Advanced Materials Research ,2011年284-286:940-944 ISSN：1022-6680
通讯作者：
Zhang, Yanlai
作者机构：
[Zhang, Yanlai; Zhang, Minglong; Zhang, Hong; Li, Lijun] Cent South Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha 410004, Hunan, Peoples R China.;[Zhang, Yanlai; Wang, Shuangfeng; Rao, Zhonghao] South China Univ Technol, Minist Educ, Key Lab Enhanced Heat Transfer & Energy Conservat, Sch Chem & Chem Engn, Guangzhou 51064, Peoples R China.
通讯机构：
[Zhang, Yanlai] C;Cent South Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha 410004, Hunan, Peoples R China.
会议名称：
International Conference on Advanced Engineering Materials and Technology (AEMT2011)
会议时间：
JUL 29-31, 2011
会议地点：
Sanya, PEOPLES R CHINA
会议主办单位：
[Zhang, Yanlai;Zhang, Hong;Li, Lijun;Zhang, Minglong] Cent South Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha 410004, Hunan, Peoples R China.^[Zhang, Yanlai;Rao, Zhonghao;Wang, Shuangfeng] South China Univ Technol, Minist Educ, Key Lab Enhanced Heat Transfer & Energy Conservat, Sch Chem & Chem Engn, Guangzhou 51064, Peoples R China.
会议论文集名称：
Advanced Materials Research
关键词：
Density;Heat Special;Microencapsulated PCM Slurries (MPCM Slurries);Non-Newtonian Fluid;Viscosity
摘要：
The microencapsulated phase change material (PCM) slurry is a kind of mixture with the PCM microcapsule particles and water. The actual PCM in the microcapsule is composed of several kinds of paraffin waxes (mainly nonadecane), and the membrane is a type of melamine resin. This study is focused on preparation, characterization, and thermal properties of the microencapsulated (PCM) slurry. The microencapsulated PCM particles are prepared by in-situ polymerization method. Four different levels of mass concentration C<inf>m</inf> of the PCM will be used such as C<inf>m</inf>=10%, 20%, 30% and 40%, respectively. The diameter of the particles is distributed in the range of 0μm∼4.5μm, and most (61%) of them occur in the range of 0.5μm∼1.5μm. The average volumetric diameter of the PCM microcapsule particle is about 0.78μm. And the average membrane thickness is about 11nm. Thermal properties of the microencapsulated PCM slurry are determined using differential scanning calorimeter (DSC). From DSC analysis, the melting and freezing temperatures and the latent heats of C<inf>m</inf>=30% are measured as 38°C and 25°C, and 37.9 kJ/kg, respectively. The rheological properties are measured by a rotating cylinder type of rheometer, which the slurry shows the pseudo plastic non-Newtonian fluid behavior with the power-law fluid index n. ©(2011) Trans Tech Publications, Switzerland.
语种：
英文
展开
Numerical simulation of natural convection heat transfer on microencapsulated PCM slurries
作者：
Zhang, Yanlai* ;Rao, Zhonghao;Wang, Shuangfeng;Zhang, Hong;Li, Lijun;...
期刊：
Applied Mechanics and Materials ,2011年84-85:279-283 ISSN：1660-9336
通讯作者：
Zhang, Yanlai
作者机构：
[Zhang, Yanlai; Zhang, Minglong; Zhang, Hong; Li, Lijun] Cent South Univ Forestry & Technol, Springer Coll Mech & Elect Engn, Changsha 410004 17, Hunan, Peoples R China.;[Wang, Shuangfeng; Rao, Zhonghao] South China Univ Technol, Minst Educ, Key Lab Enhanced Heat Transfer & energy Conservat, Guangzhou 510640, Guangdong, Peoples R China.
通讯机构：
[Zhang, Yanlai] C;Cent South Univ Forestry & Technol, Springer Coll Mech & Elect Engn, Changsha 410004 17, Hunan, Peoples R China.
会议名称：
International Conference on Green Power, Materials and Manufacturing Technology and Applications (GPMMTA 2011)
会议时间：
JUL 15-18, 2011
会议地点：
Chongqing, PEOPLES R CHINA
会议主办单位：
[Zhang, Yanlai;Zhang, Hong;Li, Lijun;Zhang, Minglong] Cent South Univ Forestry & Technol, Springer Coll Mech & Elect Engn, Changsha 410004 17, Hunan, Peoples R China.^[Rao, Zhonghao;Wang, Shuangfeng] South China Univ Technol, Minst Educ, Key Lab Enhanced Heat Transfer & energy Conservat, Guangzhou 510640, Guangdong, Peoples R China.
会议论文集名称：
Applied Mechanics and Materials
关键词：
Heat Transfer Coefficient (HTC);Microcapsule Slurry;Nusselt Number;Phase Change Materials (PCM);Rayleigh Number;Solid Phase State
摘要：
A numerical investigation on natural convection heat transfer in a 2-dimensional enclosure heated from below has been conducted with mieroencapsulated phase change material (PCM) slurries. The microencapsulated PCM slurry exhibits pseudoplastic non-Newtonian fluid behavior and has a peak value in the specific heat capacity. The viscosity of the slurry is assumed to follow the Ostwald-de Wade power law fluid model with the power-law index n and the consistency coefficient K. Both dynamic and heat transfer characteristics arc discussed on Rayleigh-Benard natural convection. Characteristics on natural convection heat transfer have been numerically investigated for different value of the width-height aspect ratio of the enclosure. According to the comparison of the two kinds of fluid with PCM and without PCM, the start of natural convection is earlier for the fluid with PCM.
语种：
英文
展开
Natural convection heat transfer of the PCM microcapsule slurry for a solid phase state in a horizontal rectangular enclosure
作者：
Zhang, Yanlai* ;Rao, Zhonghao;Wang, Shuangfeng;Zhang, Hong;Li, Lijun;...
期刊：
Advanced Materials Research ,2011年295-297:1393-1396 ISSN：1022-6680
通讯作者：
Zhang, Yanlai
作者机构：
[Zhang, Yanlai; Zhang, Minglong; Zhang, Hong; Li, Lijun] Cent South Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha 410004, Hunan, Peoples R China.;[Wang, Shuangfeng; Rao, Zhonghao] South China Univ Technol, Sch Chem & Chem Engn, Minist Educ, Key Lab Enhanced Heat Transfer & Energy con, Guangzhou 510640, Peoples R China.
通讯机构：
[Zhang, Yanlai] C;Cent South Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha 410004, Hunan, Peoples R China.
会议名称：
International Conference on Advanced Engineering Materials and Technology (AEMT2011)
会议时间：
JUL 29-31, 2011
会议地点：
Sanya, PEOPLES R CHINA
会议主办单位：
[Zhang, Yanlai;Zhang, Hong;Li, Lijun;Zhang, Minglong] Cent South Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha 410004, Hunan, Peoples R China.^[Rao, Zhonghao;Wang, Shuangfeng] South China Univ Technol, Sch Chem & Chem Engn, Minist Educ, Key Lab Enhanced Heat Transfer & Energy con, Guangzhou 510640, Peoples R China.
会议论文集名称：
Advanced Materials Research
关键词：
Microcapsule slurry;Natural convection heat transfer;Phase change material (PCM);Solid phase state
摘要：
This experiment on natural convection heat transfer with the PCM microcapsule slurry for a solid phase state of the PCM were performed at a horizontal rectangular enclosure heating from below and cooling from top. in the present study, important parameters affecting the natural convection heat transfer of the slurry with the PCM were taken into account such as the mass concentration of the PCM microencapsulated into the slurry, the temperature difference between heating plate and cooling plate, the Rayleigh number Ra and the aspect ratio (width/height) of the horizontal rectangular enclosure. The heat transfer characteristics of the PCM microcapsule slurry on natural convection were concluded from predicted conditions simplified by classifying the temperature ranges into three sub-regions, in which the PCM in the slurry was in only solid phase state, phase change state or solid-liquid coexistence state and only liquid phase state of the PCM in the microcapsule, respectively. The upper cooling plate was fixed at a constant temperature in each region, and the lower heating plate temperature was varied by carefully adjusting the electric power input of an electric plate heater. and experiment was done under the thermal steady condition in the PCM microcapsule slurry. Emphasis was given on phase changing temperature range, and experiments had been performed for four kinds of enclosures with various heights. ©(2011) Trans Tech Publications.
语种：
英文
展开
Plastic mold design of top-cover of out-shell of mouse based on CAE
作者：
Zhou, Jian* ;Li, Lijun;Hu, Yihua;Yang, Jianguo;Cheng, Ke
期刊：
Procedia Engineering ,2011年15:4441-4445 ISSN：1877-7058
通讯作者：
Zhou, Jian
作者机构：
[Zhou, Jian; Li, Lijun] Ctr South Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.;[Cheng, Ke; Hu, Yihua] Guangxi Univ Technol, Lushan Coll, Liuzhou 545006, Peoples R China.;[Yang, Jianguo] Zhuzhou Gear CO LTD, Zhuzhou 412000, Peoples R China.
通讯机构：
[Zhou, Jian] C;Ctr South Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.
会议名称：
International Conference on Advanced in Control Engineering and Information Science (CEIS)
会议时间：
AUG 18-19, 2011
会议地点：
Dali, PEOPLES R CHINA
会议主办单位：
[Zhou, Jian;Li, Lijun] Ctr South Univ Forestry & Technol, Machinery & Elect Engn Coll, Changsha 410004, Hunan, Peoples R China.^[Hu, Yihua;Cheng, Ke] Guangxi Univ Technol, Lushan Coll, Liuzhou 545006, Peoples R China.^[Yang, Jianguo] Zhuzhou Gear CO LTD, Zhuzhou 412000, Peoples R China.
会议论文集名称：
Procedia Engineering
关键词：
Plastic mold;Pro/E;Design
摘要：
The article analysis the product construction and manufacturing technology,aso points out the parting surface design, the cavity mold design and the punch mold design, calculating deformation parts working size, drawing of assembly and parts' graphes, manufacturing process of plastic mold. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of [CEIS 2011]
语种：
英文
展开
Physical properties of camellia oleifera heated by micro-wave
作者：
Jian Zhou;Lijun Li;Yihua Hu;Ke Cheng;Zhiming Yang;...
期刊：
Lecture Notes in Electrical Engineering ,2011年100 LNEE(VOL. 4):821-826 ISSN：1876-1100
通讯作者：
Zhou, J.(zhoujian1134@163.com)
作者机构：
[Lijun Li; Zhiming Yang; Ye Xue; Jian Zhou] Machinery and Electrical Engineering College, Centre South University of Forestry and Technology, Changsha, 410004, China;[Yihua Hu; Ke Cheng] Lushan College, Guangxi University, Liuzhou, 545616, China
会议名称：
The 2011 International Conference on Electric and Electronics（EEIC 2011）
会议时间：
2011-06-20
会议地点：
中国江西南昌
会议论文集名称：
Electronics and Signal Processing（EEIC 2011 LNEE V4）
关键词：
camellia oleifera;water content;quality distribution;specific heat capacity
摘要：
For obtaining the target which separates the shell and seed of camellia oleifera rapidly and easily, the article studies physical properties of camellia oleifera while heated by micro-wave. In the practice, water content of shell of camellia oleifera sample A is about 76%, water content of sample A camellia oleifera seeds is about 55%. One hundred camellia oleifera fruits are selected, the quality distribution is obtained. From the test, camellia oleifera shell of specific heat capacity is between 2.81∼3.41 J/g.°C, camellia oleifera seed of specific heat capacity is between 2.11∼2.61J/g.°C. ©2011 Springer-Verlag Berlin Heidelberg.
语种：
英文
展开
Thermal storage technology on solar energy wood drying in China
作者：
Zhang, Yanlai* ;Liu, Chuanmei;Luo, Lei;Zhang, Hong;Li, Lijun;...
期刊：
Applied Mechanics and Materials ,2011年71-78:1191-1194 ISSN：1660-9336
通讯作者：
Zhang, Yanlai
作者机构：
[Zhang, Yanlai; Zhang, Minglong; Zhang, Hong; Li, Lijun; Liu, Chuanmei; Luo, Lei] Cent S Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha, Peoples R China.
通讯机构：
[Zhang, Yanlai] C;Cent S Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha, Peoples R China.
会议名称：
International Conference on Green Building, Materials and Civil Engineering (GBMCE 2011)
会议时间：
AUG 22-23, 2011
会议地点：
Shangri La, PEOPLES R CHINA
会议主办单位：
[Zhang, Yanlai;Liu, Chuanmei;Luo, Lei;Zhang, Hong;Li, Lijun;Zhang, Minglong] Cent S Univ Forestry & Technol, Coll Mech & Elect Engn, Changsha, Peoples R China.
会议论文集名称：
Applied Mechanics and Materials
关键词：
Heat Transfer;Phase Change Materials (PCM);Thermal Energy Storage;Wood Drying
摘要：
The article mainly discusses the application situation on the solar energy wood drying in China, and summarizes its advantages and problems in the real application. Because solar energy is low in thermal density, intermittent, and it is affected by weather, these have very big limitation to use solar energy in the actual production process. Based on these, it is introduced that the advantages of thermal energy storage technology in wood drying process of solar energy, the main application modes and the actual application status. It summarizes the major thermal energy storage materials and their basic characteristics, discusses the application prospect and the importance on the latent heat storage technology in wood drying.
语种：
英文
展开
油茶果微波爆壳的特性研究
作者：
李立君;周健
期刊：
中南林业科技大学学报 ,2011年31(11):49-52,58 ISSN：1673-923X
作者机构：
[李立君; 周健] 中南林业科技大学机电工程学院
关键词：
油茶;微波;爆壳;裂纹
摘要：
油茶作为中国的特产,其深加工具有重要的现实意义。测定了油茶蒲水份含量75%左右,油茶籽的水份含量56%左右,油茶果的比热容为2.1～2.5J/g℃。探讨了在微波作用下,油茶蒲裂纹的主要形式有十字型、近1200分开型等,并计算了其临界断裂强度因子与刚度的关系。理论和实践证明,自然形状导致油茶蒲裂纹的位置是在油茶籽最凸起处,因为纤维组织最薄弱,微波作用下油茶果的最初裂开点是其自然采摘最下端。
语种：
中文
展开
