作者机构:
Nanjing Chixia Development Co., LTD, Nanjing, P.R. China;Dept. of Engineering Management, Central South Univ. of Forestry and Technology, P. R. China
会议名称:
CRIOCM 2009 International Symposium on Advancement of Construction Management and Real Estate(2009 建设管理与房地产发展国际学术会议)
会议时间:
2009-10-29
会议地点:
南京
会议论文集名称:
CRIOCM 2009 International Symposium on Advancement of Construction Management and Real Estate(2009 建设管理与房地产发展国际学术会议)论文集
摘要:
From the perspective of knowledge management the enterprise culture not only contains the enterprise culture activities or image design but also includes its staff identifying with the value concept of enterprise system arrangement and enterprise development strategy, and is embodied comprehensively in enterprise knowledge. Therefore, the modern real estate enterprises should attention and promote knowledge management for enterprise culture construction. Knowledge Management has put forward many new requirements for modern real estate enterprises culture construction , which requires the enterprise build its knowledge environment and establish its knowledge system, then shape the enterprise culture which can let the members work according to the thoughts of the enterprise. The relationship between enterprise culture and knowledge management is analyzed in this paper, and the modern real estate enterprises culture structure hierarchy is probed into under the baekground of knowledge management, based on these the thoughts of the modern real estate enterprise culture construction is put forward to build the culture atmosphere for enterprise implementing knowledge management.
摘要:
Paper presents a method for color image compression coding by using correlation vectors combined with SPIHT Algorithm. In this method, the Green component of a color image is coded using SPIHT Algorithm, and the other two components are segmented into multi-subregions by quadtree partitioning according to the non-correlation degree of three color components. Based on the calculated correlation vectors between three components in the same subregion, the coding for the other two components becomes the coding of correlation vectors. Experiment results show that this method is of high coding and decoding rates, and with quite good signal to noise ratio, compression rate and visual quality.
摘要:
It is less reported about highway bridge’s dynamic reliability research. Basing on the observation of the actual vehicle distribution, author has solved an old highway bridge’s dynamic reliability problem by self-designed program which based on the first excess mechanism by parametrical analysis. From the analysis that dynamic reliability of the old bridge was low due to cracks, so It need to be strengthened and maintained. At the same time, the author also draw some conclusions. The study method and results can provide reference for subsequent researches.
摘要:
Recently, plant-based ceramicses have attracted more and more attention for their low cost and wide application. Therefore, a novel technology using the mold pressing based on formation principle of powder metallurgy craft was introduced firstly to realize binderless agglutination and to obtain the ecoceramics with residual bamboo fiber. Thermo-gravimetric analysis and conventional measurement were performed to determine the physical and mechanical properties of bamboo ceramics body. The results show that temperature, time and pressure of moulding process all have significant effect on physical-mechanical properties, and that the optimum technology parameter is under the condition of pressure 7 MPa, temperature 160℃, and pressure time 10min. these results will provide a strong reference for further processing of bambooceramics.
作者:
Ma Qing-zhi*;Wu Yi-qiang;Peng Wan-xi;Peng Wen-li;Li Kai-fu;...
期刊:
2009 3RD INTERNATIONAL CONFERENCE ON BIOINFORMATICS AND BIOMEDICAL ENGINEERING, VOLS 1-11,2009年:876-879
通讯作者:
Ma Qing-zhi
作者机构:
[Ma Qing-zhi; Peng Wan-xi; Wu Yi-qiang] Cent South Univ Forestry & Technol, Sch Mat Sci & Engn, Changsha, Hunan, Peoples R China.;[Li Kai-fu; Hou Xiao-jia; Peng Wen-li] South China Agr Univ, Coll Forestry, Guangzhou, Guangdong, Peoples R China.
通讯机构:
[Ma Qing-zhi] C;Cent South Univ Forestry & Technol, Sch Mat Sci & Engn, Changsha, Hunan, Peoples R China.
会议名称:
iCBBE 2009
会议时间:
2009
会议地点:
Beijing, China
会议论文集名称:
The 3rd International Conference on Bioinformatics and Biomedical Engineering (iCBBE 2009). [v.2]
关键词:
plywood;the formaldehyde-emission;loose
摘要:
There is the theology of the plywood formaldehyde-emission which is similar to the solid and the liquid. The mature theory of rheological is applied to study on the mechanism of the plywood formaldehyde-emission in this paper, and the loose models of the plywood formaldehyde emission are created. The formularies F-M = F(0)e(-0.1429t). and F-k = P0/kappa(1 - e(-0.1429t)) can be received and used to describe the influence of the placed time of sawed test piece to the plywood formaldehyde-emission. The deviation between the theory value and the test value is 0.52 mg/L.
期刊:
ENTERPRISE GROWS IN SUSTAINING EFFICIENCY AND EFFECTIVENESS, CONFERENCE PROCEEDINGS,2009年:408-412
作者机构:
[Zhang Xu] Cent S Univ Forestry & Technol, Coll Forestry, Changsha, Hunan, Peoples R China.
会议名称:
2009 International SME Development Forum(2009 中小企业发展国际论坛)
会议时间:
2009-10-01
会议地点:
北京
会议论文集名称:
2009 International SME Development Forum(2009 中小企业发展国际论坛)论文集
关键词:
university students;employment;society;psychological
摘要:
Under the influence of the economic crisis, the issue of employment of university students become increasingly prominent, and attracted wide attention, the article from the perspective of sociology and psychology led to an analysis of the reasons for the employment difficulties faced by college students, and there is relevant to focus on coping strategies, with a view to fundamentally solve this problem.
作者机构:
Institute of Rheological Mechanics and Material Engineering,Central South University of Forestry and;Research Institute of Forestry of Ganzhou City,Ganzhou 341000,P.R.China
会议名称:
The 3rd International Conference on Bioinformatics and Biomedical Engineering(iCBBE 2009)(第三届生物信息与生物医学工程国际会议)
会议时间:
2009-06-11
会议地点:
北京
会议论文集名称:
The 3rd International Conference on Bioinformatics and Biomedical Engineering(iCBBE 2009)(第三届生物信息与生物医学工程国际会议)论文集
关键词:
Camellia oleifera;kernel hull;leaf;biomedical components;GC/MS;Top value added
摘要:
Abundant leaves and kernel hulls of Tea-oil tree (Camellia oleifera) are still underutilized and wastefully abandoned to pollute environment. In order to solve this problem and better utilize the leaves and kernel hulls of C. oleifera, we used GC/MS technology to analyze the top value-added bioactive constituents of their benzene/ethanol extractives. After treated with freeze-drying, the fresh leaves and kernel hulls were extracted fully in benzene/ethanol, respectively, and then the two extractives were analyzed by online linked GC/MS. Relative content of each component was determined by area normalization. There are 25 components identified in the leaf extractive, and the main constituents are butyraldehyde,semicarbazone (11.58%), hexatriacontane (8.04%), 1,6-anhydro-.beta.-D-glucopyranose, (7.54%), octadecane (7.53%), benzeneacetic acid,4-hydroxy-(6.59%), 1,3-dioxolane,4-ethyl-5-hexyl-2,2-bis(trifluoro methyl)-,cis-(6.53%), etc. The extractive of kernel hull also contains abundant constituents identified as: 2-furancarboxaldehyde,5-(hydroxymethyl)-(32.37%), 1,3-propanediol,2-ethyl-2-(hydroxymethyl)-(28.34%), 1,2,3-benzenetriol (15.10%), etc. As the first report here, the analytical result by GC/MS showed that the benzene/ethanol extractives of both leaf and kernel hull of C. oleifera contain abundant components of rare natural medicinal materials, and also contain many components which can be developed into two value-added materials of high-grade cosmetic, bioenergy, and industrial solvent.
期刊:
PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON PRODUCT INNOVATION MANAGEMENT, VOLS I AND II,2009年:121-127
作者机构:
[Chen Xingyan; Tao Tao; Xiang Shilong] Cent S Univ Forestry & Technol, Sch Mat Sci & Engn, Changsha 410004, Peoples R China.
会议名称:
4th International Conference on Productinnovation Management(第四届产品创新管理国际会议)
会议时间:
2009-08-22
会议地点:
武汉
会议论文集名称:
4th International Conference on Productinnovation Management(第四届产品创新管理国际会议)论文集
关键词:
production management;throughput;bottleneck;furniture industry
摘要:
According to the problem which China's furniture manufacturing industry is facing, the paper mainly analyses the management ways and strategies .At the same time, in order to realize furniture industry development at higher level, higher quality, the paper proposes that making full use of inherent simplicity of the system can achieve breakthroughs in the shortest possible time with a minimum of resources. For furniture manufacturing industry, making efforts to increase throughput, reducing inventory, shortening production cycle and strengthening the quality management are the direction of the future.
摘要:
In order to overcome the above-mentioned negative effects, the fresh Chinese-fir shavings were extracted in KOH soltion, were analyzed by ZETA and SIZER to find out the leaching rule of nano particles in Chinese-fir wood. The results are as follows: (1) The extraction mass arrived at the maximum value when KOH concentration is about 17.5%. The micro/nano particles in Chinese-fir shavings would be discharged sufficiently in the KOH solution with the increaing of extracting time.(2) The diameter the micro/nano particles of wood extractives and hemicellulose is comparatively scattered according to volume fraction. Micro/nano particles in the diameter of 91.3-342 nm, 91.3-342 nm, 342-1720 nm is the most at the extracting time of 3h, 16h, 24h, respectively (3)The diameter the micro/nano particles of wood extractives and hemicellulose is chiefly between 342nm and 6440 nm according to number fraction.Micro/nano particles in the diameter of 91.3-342nm, 91.3-342nm, 91.3-342nm is the most at the extracting time of 3h, 16h, 24h, respectively.
摘要:
We consider the Neumman boundary value problem of second order elliptic equation with oscillating periodic coefficients in perforated domains. It is very difficult to solve the problem by using numerical methods directly, such as finite element method and finite difference method, due to the huge computing scaling. Using homogenization method, two-scale asymptotic expansion and projective interpolation, a high accuracy algorithm and its error estimate are reported. The rigorous proofs of the results are proposed. Finally, numerical example supports the theoretical results.
作者机构:
Biotechonology Core Facilities Central South University of Forestry and Technology Changsha,Hunan,Ch;College of Forestry Central South University of Forestry and Technology Changsha,Hunan,China
会议名称:
The 3rd International Conference on Bioinformatics and Biomedical Engineering(iCBBE 2009)(第三届生物信息与生物医学工程国际会议)
会议时间:
2009-06-11
会议地点:
北京
会议论文集名称:
The 3rd International Conference on Bioinformatics and Biomedical Engineering(iCBBE 2009)(第三届生物信息与生物医学工程国际会议)论文集
摘要:
Agaricus bisporus is a delicious, nutritious mushroom with medical function. Cross breeding is limited due to its taxonomic contradiction. We analyzed rDNA ITS sequences of two high quality Agaricus bisporus strains (No.Tb07, As2796). Tb07 strain was selected from foreign mushroom by CSUFT under protection. As2796 strain was a high quality local strain in nature in China. By sequencing the ITS regions and comparing with those sequences from Genebank by BLAST search, the results concluded that the ITS region length of Tb07 strain was 701 bp and As2796 strain 695 bp. GC content ranged from 41.72% to 42.22% in ITS1 region and 43.89% to 44.31% in ITS2 region. ITS1 and ITS2 sequences of two strains had seven bp differences. Tb07 strain had 314 bp in ITS1 and 262 bp in ITS2, As2796 strain had 315 bp in ITS1 and 255 bp in ITS2. It suggested that in natural population of Agaricus bisporus had a little variation. From ITS sequence differences, we can select two parents which have a distance relationship for cross breeding. It was important to explore its wild germplasm resource and increased its genetic variation using cross breeding with aid of molecular data.