Effects of entraining velocity of lubricant and sliding velocity on friction behavior in stainless steel sheet rolling
作者:
Wang, Zhr-gang;Dohda, Kuni-aki;Luo, Ying-she*
期刊:
中南大学学报(英文版) ,2007年14(1):224-231 ISSN:2095-2899
通讯作者:
Luo, Ying-she
作者机构:
Gifu Univ, Fac Engn, Dept Mech & Syst Engn, Gifu 5011193, Japan.;Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Peoples R China.;[Luo, Ying-she] Gifu Univ, Fac Engn, Dept Mech & Syst Engn, 1-1 Yanagido, Gifu 5011193, Japan.
通讯机构:
[Luo, Ying-she] G;Gifu Univ, Fac Engn, Dept Mech & Syst Engn, 1-1 Yanagido, Gifu 5011193, Japan.
会议名称:
4th Pacific Rim Conference on Rheology
会议时间:
AUG 07-11, 2005
会议地点:
Shanghai, PEOPLES R CHINA
会议主办单位:
Gifu Univ, Fac Engn, Dept Mech & Syst Engn, Gifu 5011193, Japan.^Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Peoples R China.
关键词:
friction;lubrication;sheet metal rolling;entraining velocity of lubricant;sliding velocity;slide/roll ratio
摘要:
A series of experiments was carried out using a rolling-type tribometer to investigate the effects on friction behavior of the entraining velocity of the lubricant (ν) at the inlet to the contact zone and sliding velocity during deformation (Δν). Experiments with stainless steel sheets of two different surface roughness show that the variations in the friction coefficient with entraining velocity and sliding velocity are largely dependent on the initial surface texture of the workpiece. For a smooth workpiece, the friction coefficient decreases with increasing sliding velocity but keeps almost constant with increasing entraining velocity. However, for a rough workpiece, the friction coefficient initially decreases slowly and increases largely with increasing sliding velocity or decreasing entraining velocity. Observation of the rolled surface for a smooth workpiece shows that, with increasing entraining velocity, the slip band becomes more marked, and with increasing sliding velocity, the rubbed portions become more conspicuous. For a rough workpiece, galling occurs at high sliding velocity. The critical condition for galling outbreak is shown on the ν-Δνgraph. The galling outbreak process is observed by interrupting the rolling process. ©2007 Central South University Press, Sole distributor outside Mainland China: Springer.
语种:
英文
展开
Calculation and analysis on the thermal damage at high temperature
作者:
Tang, Songhua;Luo, Yingshe* ;Ning, Mingzhe;Wang, Zhichao
期刊:
Key Engineering Materials ,2007年353-358:1191-1194 ISSN:1013-9826
通讯作者:
Luo, Yingshe
作者机构:
[Tang, Songhua; Wang, Zhichao] Xiangtan Univ, Inst Fundamental Mech & Mat Engn, Xiangtan 411105, Peoples R China.;[Ning, Mingzhe; Luo, Yingshe] Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Hunan, Peoples R China.;[Tang, Songhua; Ning, Mingzhe] Cent S Univ, Inst Civil Engn, Changsha 410075, Hunan, Peoples R China.
通讯机构:
[Luo, Yingshe] C;Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Hunan, Peoples R China.
关键词:
thermal damage;steel structure;residual strength;thermal stress
摘要:
In fire resistant design traditional method based on experiment is being replaced by method based on calculation.in this paper Damage mechanics is applied to calculate and analyze the process of damage and failure of structures at high temperature through solving jointly the closed equations composed of the thermal damage evolving equation based on the residual strength, heat conduction equations, equilibrium equations, geometry equations and physics equations. An example of a truss is given to illustrate the calculation of thermal damages and stresses at high temperature. The results suggest, the bearing capacity at high temperature is influenced by these three main factors: thermal damage resulted from the elevated temperature, the thermal stresses and the original load. This provides a new research method for the modern fire-resistant design based on calculation and can be developed and applied in the numerical simulation of the process of damage and failure of the integrated structures.
语种:
英文
展开
再生混凝土强度计算公式中A、B值的确定
作者:
邓旭华;罗迎社;王智超;刘文彬;刘勇
期刊:
混凝土 ,2007年(2):29-30 ISSN:1002-3550
作者机构:
湘潭大学土木工程与力学学院;中南林业科技大学流变力学与材料工程研究所;[刘勇] 湖南省交通建设质量监督湘潭分站;[王智超; 刘文彬; 邓旭华] 湘潭大学;[罗迎社] 中南林业科技大学
关键词:
再生混凝土;再生骨料;骨料系数
摘要:
用废混凝土破碎物代替粗骨料配制再生混凝土时,用普通混凝土配制强度公式计算其强度,会存在较大的误差,主要是公式中骨料系数A,B值不同。通过试验确定了再生骨料系数A,B值以及相应的强度计算公式,可为再生混凝土实际强度的计算提供参考。
语种:
中文
展开
二元共聚高吸水性树脂PAMA的吸液与保水性能
作者:
谢建军
期刊:
高分子材料科学与工程 ,2007年23(5):116-119 ISSN:1000-7555
通讯作者:
Xie, J.-J.(xiejianjun12@sina.com.cn)
作者机构:
[谢建军] Institute of Rheological Mechanics and Materials Engineering, College of Materials Science and Engineering, Central South Forestry University of Technology, Changsha 410004, China
通讯机构:
[Xie, J.-J.] I;Institute of Rheological Mechanics and Materials Engineering, College of Materials Science and Engineering, Central South Forestry University of Technology, China
关键词:
丙烯酰胺;2-丙烯酰胺基-2-甲基丙磺酸;高吸水性树脂;吸液性;保水性;吸液速率
摘要:
采用溶液聚合方法,以丙烯酰胺(AM)、2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为单体,N,N'-亚甲基双丙烯酰胺(NMBA)为交联剂,过硫酸钾(KPS)为引发剂合成了高吸水性树脂PAMA,并进行了吸液、保水性能研究.研究表明该树脂吸水倍率2451 g/g,吸生理盐水倍率119 g/g,对纯甲醇的吸液倍率(277 g/g);对吸液速率结果通过回归分析得吸蒸馏水时Qw=862.6t0.1855, 吸生理盐水时Qs=52.0t0.1317.该吸水树脂具有优良的耐温保水性能和较好的热稳定性,且保水率与恒温时间呈线性关系,并能有效提高砂土的饱和含水量,可对砂土进行有效的改良.
语种:
中文
展开
木质素的结构及其改性研究进展
作者:
谢建军;罗迎社
期刊:
功能材料 ,2007年(A09):11-14 ISSN:1001-9731
作者机构:
[谢建军; 罗迎社] 中南林业科技大学材料科学与工程学院;[谢建军; 罗迎社] 中南林业科技大学流变力学与材料工程研究所
会议名称:
第六届中国功能材料及其应用学术会议
会议时间:
2007-11-15
会议地点:
武汉
会议论文集名称:
第六届中国功能材料及其应用学术会议论文集
关键词:
木质素;木质素改性;评述
摘要:
对木质素的存在状态、元素组成、结构主体和主体的连接方式等对木质素的分子结构进行了系统介绍,并主要综述了国内木质素的改性,特别是在氧化、磺化、烷基化,羟烷基化、胺化(曼尼希反应)、接枝共聚、缩聚反应等化学改性反应及水解与降解反应的研究现状.
语种:
中文
展开
一种基于聚类的RBF神经网络模型
作者:
周经野;彭相华;王智超;余敏
期刊:
湘潭大学学报(自然科学学报) ,2007年29(4):99-103 ISSN:2096-644X
作者机构:
[周经野; 彭相华] 湘潭大学信息工程学院;[王智超] 湘潭大学土木工程与力学学院;[余敏] 中南林业科技大学流变力学与材料工程研究所
关键词:
聚类分析;径向基函数;RBF子网;BC—RBFNN模型
摘要:
应用于工程中的径向基函数(RBF)神经网络模型,当训练样本量很大时常存在训练学习速度慢和拟合精度不高的问题.针对这一情况提出了一种基于聚类的RBF神经网络(BC—RBFNN)模型.该模型首先通过对训练样本进行聚类分析,将其分为不同的类,接着根据每类的训练样本构造一个RBF子网并获取其相关参数,接着再将各个子网组织成一个BC-RBFNN模型.通过对其进行理论分析和性能检验试验,结果表明该模型能加快网络训练学习速度,缩小的模型规模,提高网络的预测精度.
语种:
中文
展开
小偏心受压构件相对受压区高度的较精确计算方法
作者:
黄太华
期刊:
结构工程师 ,2007年23(6):20-23+65 ISSN:1005-0159
作者机构:
中南林业科技大学土木建筑与力学学院,长沙,410004;[黄太华] 中南林业科技大学
关键词:
小偏心受压构件;相对受压区高度;精确算法
摘要:
通过对GB 50010-2002《混凝土结构设计规范》中小偏心受压构件相对受压区高度计算方法的分析,认为运用现行规范方法计算出的小偏心受压构件相对受压区高度在很多的情况下均与实际的小偏心受压构件相对受压区高度有较大的误差,这种误差将导致小偏心受压构件的配筋结果偏大或偏小.提出了一种简便的小偏心受压构件相对受压区高度的较精确计算方法,以期能使小偏心受压构件的配筋设计经济合理.
语种:
中文
展开
BP神经网络在桥梁结构损伤诊断中的应用
作者:
张宇辉;邵旭东
期刊:
山西建筑 ,2007年33(14):286-287 ISSN:1009-6825
作者机构:
中南林业科技大学土木建筑与力学学院,湖南长沙,410004;湖南大学桥梁工程研究所,湖南长沙,410082
关键词:
损伤诊断;损伤识别;BP神经网络
摘要:
针对桥梁台后结构损伤分别进行了动力计算和静力试验,提出了采用BP神经网络进行结构损伤位置和程度的识别诊断研究,试验结果表明比较准确可信,该方法具有良好的应用前景。
语种:
中文
展开
道路工程项目关键路径上活动相对重要程度的探讨
作者:
王昭辉
期刊:
基建优化 ,2007年28(05):33-35 ISSN:1000-7717
作者机构:
中南林业科技大学,土木建筑与力学学院,湖南,长沙,410004
关键词:
项目活动;活动相对重要程度;网络结构
摘要:
文章在项目网络结构的基础上,提出了一种排列项目活动相对重要程度的方法。在此基础上,对道路项目网络结构关键路径中的活动相对重要程度进行了研究。本文研究使项目管理人员能识别所有项目活动的相对重要程度,确定项目活动管理的优先秩序,从而为实现项目资源的合理配置和对进度进行有效控制提供了依据。
语种:
中文
展开
宽板弯曲成形过程中板厚变化精化模型
作者:
贺广零;李倩妹;洪芳;彭双艳
期刊:
塑性工程学报 ,2007年14(6):205-208 ISSN:1007-2012
通讯作者:
He, G.-L.(hglcool@126.com)
作者机构:
[贺广零] 同济大学建筑工程系;[李倩妹] 中南林业科技大学土木建筑与力学学院;[洪芳] 福建工程学院土木工程系;[彭双艳] 长安大学建筑工程学院
通讯机构:
Department of Building Engineering, Tongji University, China
关键词:
宽板;弯曲成形;板厚变化;精化模型
摘要:
基于弹塑性力学基本理论,在考虑板材真实本构关系基础上建立了宽板板厚变化精细化模型。同时,借鉴分三层思想,较好地考虑了宽板在弯曲成形过程中部分纤维层应力反号过程,因此具有较好的精确性和较强的普适性。最后,以铝板为例进行分析,发现计算值和实验值吻合较好。本文研究成果为深入研究弯曲变形过程和科学制定弯曲成形工艺具有一定的理论价值和实用意义。
语种:
中文
展开
固本溪大桥施工过程中的应力控制研究
作者:
易文;贺国京;王天鹏
期刊:
中南林业科技大学学报 ,2007年27(4):66-70 ISSN:1673-923X
作者机构:
中南林业科技大学,土木建筑与力学学院,湖南,长沙,410004;[易文; 贺国京; 王天鹏] 中南林业科技大学
关键词:
土建工程;刚构桥;预应力混凝土;施工;应力;控制技术
摘要:
根据有限元理论计算确定主梁应力.借助预埋钢弦传感元件,测试主梁混凝士应变,确定实际结构的真实应力,为大跨度预应力混凝上桥梁的安全施工和合理成桥状态提供理论依据和施工参考.
语种:
中文
展开
Application of least square with all-matrix in Gubengxi long bridge
作者:
Yi, Wen* ;He, Guojing;Yi, Jin;Wang, Tianpeng
期刊:
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON HEALTH MONITORING OF STRUCTURE, MATERIALS AND ENVIRONMENT, VOLS 1 AND 2 ,2007年:1008-1013
通讯作者:
Yi, Wen
作者机构:
[Wang, Tianpeng; Yi, Jin; He, Guojing; Yi, Wen] Cent S Forestry & Technol Univ, Coll Civil Engn, Changsha 410004, Peoples R China.
通讯机构:
[Yi, Wen] C;Cent S Forestry & Technol Univ, Coll Civil Engn, Changsha 410004, Peoples R China.
会议名称:
结构、材料与环境健康监测国际会议(International Conference on Health Monitoring og Structure,Material and Environment)
会议时间:
2007-10-16
会议地点:
南京
会议论文集名称:
结构、材料与环境健康监测国际会议(International Conference on Healt
关键词:
Continuous rigid frame bridge;Least square;Application
摘要:
This paper mainly studied the application of least square in continuous rigid frame bridge. According to the practical application in Gubengxi bridge, We can test that least square can be used in the construction control of the same bridge style.
语种:
英文
展开
从一个校园规划谈对模数化设计的认识
作者:
高波
期刊:
中外建筑 ,2007年(3):59-60 ISSN:1008-0422
作者机构:
中南林业科技大学土木建筑与力学学院
关键词:
模数化;结构;典型空间
摘要:
针对当前设计工作中普遍存在的作品质量与设计周期的矛盾,本文对模数化设计思想的起源和实质进行了深入探讨,并对其在实践当中需注意的问题作了简要的分析,试图从设计方法上寻找解决途径,借此希望能为建筑师们广开思路,提供一些有意义的尝试。
语种:
中文
展开
风景旅游镇的规划建设——以武陵源索溪峪镇高云片区规划为例
作者:
段巧玲;王峰
期刊:
Kexue Jishu Chuangxin ,2007年(24):177 ISSN:1673-1328
作者机构:
长沙市规划信息服务中心,湖南,长沙,410013;中南林业科技大学土木建筑与力学学院,湖南,长沙,410004
关键词:
旅游镇;索溪峪;保护;生态;发展;实施
摘要:
风景旅游镇是位于风景名胜区之内且本身具有较高的风景资源价值又可开展旅游的村镇.风景旅游镇所面临的最大问题就是开发与保护的矛盾.在旅游镇的规划建设中,要保证在对旅游镇进行开发建设的同时不影响风景名胜区的保护工作,产生生态效益与经济效益双赢的局面.
语种:
中文
展开
Research on the effect of entry angle and pressure-pad force on deep-draw thermo-rheological forming of a TC1 Ti-alloy sheet
作者:
Shuiping Yin* ;Yingshe Luo;Zheng Cao;ShuLing Luo;Wenbin Liu
期刊:
Key Engineering Materials ,2007年353-358:635-638 ISSN:1013-9826
通讯作者:
Shuiping Yin
作者机构:
[Shuiping Yin; Wenbin Liu; Zheng Cao] Xiangtan Univ, Inst Fundamental Mech & Mat Engn, Xiangtan 411105, Peoples R China.;[Yingshe Luo] Cent S Univ Forestry & Technol, Inst Rheolog Mech & Mat Engn, Hunan 410004, Peoples R China.;[ShuLing Luo] Meijo Univ, Tempaku Ku, Nagoya, Aichi 468, Japan.
通讯机构:
[Shuiping Yin] X;Xiangtan Univ, Inst Fundamental Mech & Mat Engn, Xiangtan 411105, Peoples R China.
关键词:
press-working of sheet metal;wrinkling;splitting;numerical simulation;deep-draw thermo-rheological forming;entery angle;TC1 titanium alloy
摘要:
Numerical simulation can be successfully applied to evaluate product manufacturability and predict, while material wrinkling and splitting are associated with entry angle and pressure-pad force during sheet metal stamping process. In this paper, the influence of entry angle and pressure-pad force on deep-drawing thermal forming of TC1 titanium alloy was analyzed by using explicit dynamic finite element software STAMPACK, two kinds of main invalidation, including wrinkling and splitting, and obtained that the entry angle is an important factor for deep-draw thermal forming. By analyzing the forming operation and optimizing the entry angle and the pressure-pad force of the die, the best range of the entry angle and the suitable pressure-pad force without wrinkling were obtained and splitting phenomena were controlled effectively. The researched results of numerical simulation provided some parameters for die design.
语种:
英文
展开
提高油茶在生物质能源中的应用价值
作者:
张党权;谭晓风;彭万喜;刘其梅;曾艳玲;...
期刊:
中山大学学报(自然科学版)(中英文) ,2007年46(B06):109-110 ISSN:0529-6579
作者机构:
中南林业科技大学,经济林育种与栽培国家林业局重点实验室,湖南,长沙,410004;中南林业科技大学,流变力学与材料工程研究所,湖南,长沙,410004;[曾艳玲; 陈鸿鹏; 刘其梅; 马清芝; 田华; 谭晓风; 张党权; 彭万喜] 中南林业科技大学
关键词:
油茶;茶油;生物质能源;生物柴油
摘要:
油茶是我国特产的世界著名的食用与工业油料树种.油茶在我国18个省、市、自治区有栽培分布,栽培分布范围广,品种资源丰富,结实早,产量高.南方山区丘陵的农民都有油茶生产经营习惯,栽培技术规范齐全.将油茶作为生物质能源树种栽培利用,对于开发我国生物质能源,提高我国能源自给能力具有一定的战略意义.
语种:
中文
展开
热处理对刨花板力学性质的影响
作者:
刘其梅;彭万喜;张党权;马清芝;罗迎社
期刊:
功能材料 ,2007年038(A09):3482-3484 ISSN:1001-9731
作者机构:
[刘其梅; 彭万喜; 张党权; 马清芝; 罗迎社] 中南林业科技大学流变力学与材料工程研究所;[刘其梅; 彭万喜; 张党权; 马清芝; 罗迎社] 中南林业科技大学经济林育种与栽培国家林业局重点实验室
会议名称:
第六届中国功能材料及其应用学术会议
会议时间:
2007-11-15
会议地点:
武汉
会议论文集名称:
第六届中国功能材料及其应用学术会议论文集
关键词:
刨花板;力学性质;热处理
摘要:
为了探索提高刨花板力学性质的途径,采用全因素试验方法,对12mm 刨花板进行热处理研究.结果表明:在热处理过程中,处理时间对刨花板的静曲强度 (MOR)和弹性模量(MOE)影响比较明显,而对内结合强度(IB)影响比较弱;处理温度对刨花板的内结合强度影响显著,而对静曲强度和弹性模量影响不显著.经过热老化处理,获得了力学性质明显改善的优质刨花板.
语种:
中文
展开
Rheological properties of carbon constructional quality steels
作者:
Yang, Liu;Luo, Ying-she* ;Tang, Xiao-di
期刊:
中南大学学报(英文版) ,2007年14(1):285-288 ISSN:2095-2899
通讯作者:
Luo, Ying-she
作者机构:
[Luo, Ying-she] Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Peoples R China.;Zhejiang Forestry Univ, Sch Landscape Architecture, Zhejiang 311300, Peoples R China.
通讯机构:
[Luo, Ying-she] C;Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Peoples R China.
会议名称:
4th Pacific Rim Conference on Rheology
会议时间:
AUG 07-11, 2005
会议地点:
Shanghai, PEOPLES R CHINA
会议主办单位:
Cent S Univ Forestry & Technol, Inst Rheol Mech & Mat Engn, Changsha 410004, Peoples R China.^Zhejiang Forestry Univ, Sch Landscape Architecture, Zhejiang 311300, Peoples R China.
关键词:
creep test;constitutive equation;carbon constructional quality steels;theological viscosity;theological model
摘要:
Creeping performance is one of the typical rheological properties. Creep tests under the same temperature and different stress levels were done on carbon constructional quality steels, the integral creep constitutive equation and differential stress-strain constitutive relationship were established according to relevant rheological model, and the integral core of the creep was achieved through the experiments. Moreover, the coefficient related with viscosity of 35 steel was obtained through creep experiments' data. The viscosity coefficients of TC11 titanium alloy and Lc4 aluminum alloy were also compared and analyzed. ©2007 Central South University Press, Sole distributor outside Mainland China: Springer.
语种:
英文
展开
Experimental research on regression coefficients in recycled concrete Bolomey formula
作者:
Zhang, Xue-bing* ;Deng, Shou-chang;Deng, Xu-Hua;Qin, Yin-hui
期刊:
中南大学学报(英文版) ,2007年14(1):314-317 ISSN:2095-2899
通讯作者:
Zhang, Xue-bing
作者机构:
[Zhang, Xue-bing] Xiangtan Univ, Coll Civil Engn & Mech, Xiangtan 411105, Peoples R China.;Cent S Forestry & Sci Technol Univ, Coll Civil Engn & Mech, Changsha 410004, Peoples R China.
通讯机构:
[Zhang, Xue-bing] X;Xiangtan Univ, Coll Civil Engn & Mech, Xiangtan 411105, Peoples R China.
会议名称:
4th Pacific Rim Conference on Rheology
会议时间:
AUG 07-11, 2005
会议地点:
Shanghai, PEOPLES R CHINA
会议主办单位:
Xiangtan Univ, Coll Civil Engn & Mech, Xiangtan 411105, Peoples R China.^Cent S Forestry & Sci Technol Univ, Coll Civil Engn & Mech, Changsha 410004, Peoples R China.
关键词:
recycled concrete;strength calculation formula;Bolomey formula;regression coefficients
摘要:
Conservation of natural resources and preservation of environment are the essence of any development. The use of recycled aggregate concrete(RAC) is an attempt and an answer to some of the problems in constructional engineering. So recycling the decasting concrete catches more attention in the world. It depends on the strength for construction bearing to utilize recycled concrete(RC), but the strength calculation formula of RC has not been put forward yet. There is a linear relation between the common concrete compression strength and cement strength with cement-water mass ratio, whether this relationship also exists in recycled concrete or not it should be verified by experiment. Based on some experiments, the relationship between recycled concrete compression strength and its cement-water mass ratio was established, and the method to determine A′ and B′ values in Bolomey Formula was discussed.
语种:
英文
展开
浅析项目成本估计与预算
作者:
周莉
期刊:
山西建筑 ,2007年33(2):253-254 ISSN:1009-6825
作者机构:
中南林业科技大学土木建筑与力学学院,湖南,长沙,410004
关键词:
项目预算;系统预算;成本估计
摘要:
针对传统的预算方法不能适应现代项目管理的问题,介绍了一种基于项目的预算方法———系统预算,并就其中成本估计过程提出了一些改进建议,以使预算与项目直接联系起来,达到改善预算效果的目的。
语种:
中文
展开