期刊论文

Liu, Xiu-Bo(liuxiubosz@163.com)

中文

材料工程

1001-4381

2018

46

5

79-85

10.11868/j.issn.1001-4381.2017.000698

国家自然科学基金资助项目（U17371X2） 湖南省自然科学基金资助项目（2018JJ2677） 河南科技大学高端轴承摩擦学技术与应用国家地方联合工程实验室开放基金资助项目（201803）

本校为第一且通讯机构

为研究不同温度热处理对激光熔覆钛基复合涂层组织和微动磨损性能的影响,采用激光熔覆技术在TA2钛合金表面制备40%Ti-25.2%TiC-34.8%WS2(质量分数)复合涂层,将涂层分别置于300,500℃和700℃真空中保温1h,分析热处理前后涂层的显微组织和微动磨损耐磨性能。结果表明:未经过热处理涂层及经过不同温度热处理涂层的主要物相均为α-Ti,(Ti,W)C_(1-x),TiC,Ti_2SC和TiS。未热处理及经过300,500℃和700℃热处理1h涂层的显微硬度分别为1049.8,980.7,1143.3HV_(0.5)和1190.7HV_(0.5)。经过700℃热处理1h涂层表现出优异的微动磨损性能,磨损机理为黏着磨损和磨粒磨损。

To study the effect of heat treatment at different temperatures on microstructure and fretting wear resistance of laser clad Ti-matrix composite coatings, Ti-matrix composite coatings were fabricated by laser cladding with the powder precursor: 40%Ti-25.2%TiC-34.8%WS2 (mass fraction). The coatings were heated at 300, 500℃ and 700℃ in vacuum for 1h respectively, and the microstructure and fretting wear resistance of coatings were analyzed. Results indicate that the main phase compositions of coatings are all composed of α-Ti, (Ti, W)C1-x, TiC...