作者机构：
[Li, Xingong; Li, Yun; Wu, Yiqiang; He, Xia; Cheng, Xiyi; Li, Xianjun] Cent South Univ Forestry & Technol, Mat Sci & Engn Coll, Changsha 410004, Hunan, Peoples R China.;[Liu, Dandan] Nanjing Forestry Univ, Coll Furniture & Ind Design, Nanjing 210037, Jiangsu, Peoples R China.;[Huang, Qiongtao] Yihua Enterprise Grp Co Ltd, Yihua Timber Ind, Shantou 515834, Guangdong, Peoples R China.
通讯机构：
[Li, Xianjun] C;Cent South Univ Forestry & Technol, Mat Sci & Engn Coll, Changsha 410004, Hunan, Peoples R China.
关键词：
Dimensional stability;Energy storage and saving;Polyethylene glycol (PEG);Thermal properties;Wood
摘要：
Green fir wood (Pseudotsuga menziesii) was modified with polyethylene glycol (PEG) to produce wood composites for energy storage and conversion. The PEG-modified wood composites were evaluated based on their dimensional stability, durability, and thermal properties by various analytical methods. The differential scanning calorimetry (DSC) results showed the melting temperature and the latent heat of the phase change material (PCM) composite were 26.74 °C and 73.59 J/g, respectively. Thermal cycling tests and thermogravimetric analysis confirmed the composite exhibited good thermal stability, reliability, and chemical stability. All treated specimens were free from noticeable defects, and the addition of a surface varnish coating prevented PEG from leaching. The PEG-modified composites exhibited improved dimensional and thermal performance, which makes this material a potential candidate for economical and green, lightweight building materials.
作者机构：
[李贤军; 夏燎原; 吴义强] College of Material Science and Engineering, Central South University of Forestry and Technology, Changsha, 410004, China;[胡云楚] College of Science, Central South University of Forestry and Technology, Changsha, 410004, China;[黄琼涛] Guangdong Yihua Timber Industry Corporation Limited, Shantou, 515834, China
通讯机构：
[Li, X.] C;College of Material Science and Engineering, Central South University of Forestry and Technology, Changsha, China
作者机构：
[龙柯全; 吴义强; 肖俊华; 李贤军; 左迎峰] College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan 410004, China
通讯机构：
[Wu, Y.] C;College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan, China
期刊：
建筑材料学报,2016年19(5):860-865 and 882 ISSN：1007-9629
通讯作者：
Wu, Yiqiang(wuyq0506@126.com)
作者机构：
[李新功; 吴义强; 张新荔; 朱晓丹; 左迎峰; 李贤军] College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, 410004, China
通讯机构：
College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, China
作者机构：
[Song, Kunlin; Li, Mei-Chun; Wu, Qinglin; De Hoop, Corneils F.] Louisiana State Univ, AgCtr, Sch Renewable Nat Resources, Baton Rouge, LA 70803 USA.;[Lee, Sunyoung] Korea Forest Res Inst, Dept Forest Prod, Seoul 130712, South Korea.;[Wu, Yiqiang; Qing, Yan] Cent South Univ Forestry & Technol, Coll Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
通讯机构：
[Wu, Qinglin] L;Louisiana State Univ, AgCtr, Sch Renewable Nat Resources, Baton Rouge, LA 70803 USA.
摘要：
This research aims to develop low cost, sustainable, environmentally friendly, and high performance water-based drilling fluids (WDFs) using bentonite (BT), polyanionic cellulose (PAC), and cellulose nanocrystals (CNCs). The effect of concentration of BT, PAC, and CNCs on the rheological and filtration properties of PAC/CNC/BT-WDFs was investigated. Eight empirical rheological models were applied to fit quantitatively the fluid properties. Results showed that the presence of PAC, CNCs, and BT improved the rheological and filtration properties of the WDFs. Among the eight empirical rheological models, the Sisko model performed the best in simulating the rheological behavior of the fluids. At the same concentration level of PAC and CNCs, CNCs had more impact on the rheological properties, whereas PAC had more influence on the filtration property. The incorporation of PAC resulted in very low permeable filter cakes, leading to the excellent filtration property. The combined use of PAC and CNCs yielded better rheological and filtration properties.
作者机构：
[肖俊华; 左迎峰; 刘文杰; 吴义强; 赵星] College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha;410004, China;[肖俊华; 左迎峰; 刘文杰; 吴义强; 赵星] 410004, China
通讯机构：
[Wu, Y.] C;College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, China
作者机构：
[Qing, Yan; Wu, Yiqiang; Liu, Liu; Tian, Cuihua; Yan, Ning; Li, Xianjun; Li, Lei] Cent South Univ Forestry & Technol, Coll Mat Sci & Technol, Changsha, Hunan, Peoples R China.;[Qing, Yan; Wu, Yiqiang; Li, Xianjun] Cent South Univ Forestry & Technol, Hunan Prov Collaborat Innovat Ctr High Efficiency, Changsha, Hunan, Peoples R China.;[Yan, Ning] Univ Toronto, Fac Forestry, Toronto, ON M5S 1A1, Canada.
通讯机构：
[Qing, Y; Wu, YQ] C;Cent South Univ Forestry & Technol, Coll Mat Sci & Technol, Changsha, Hunan, Peoples R China.;Cent South Univ Forestry & Technol, Hunan Prov Collaborat Innovat Ctr High Efficiency, Changsha, Hunan, Peoples R China.
摘要：
To overcome the poor mechanical strength of thermosensitive hydrogels, cellulose nanofibril (CNF) was used as a reinforcing agent for the preparation of PEG-based thermosensitive hydrogels through radical copolymerization. The maximum bloom and rupture strength of the hydrogel were increased respectively with 37.7% and 52% at CNF content of 0.35 wt%. The dynamic rheological properties further confirmed that CNF played a significant role in the improvement of mechanical strength, especially in elasticity. Due to abundant hydroxyl groups exposed on the surface of CNFs, the obtained hydrogels exhibited a decreasing equilibrium swelling ratio (ESR) and deswelling rate in comparison with untreated hydrogels. However, the water retention ratio (WRR) increased when CNF content increased. In addition, both treated and untreated thermosensitive hydrogels possessed continuous volume phase transition with temperature ranging from 0 to 70 °C. Combined with SEM and ATR-FTIR tests, it was indicated that CNFs contributed to the formation of hydrogen bonding between the copolymer matrix and a tight physical lock by means of an entanglement effect. These composite hydrogels are considered as promising candidates in various potential applications of soft actuators, biosensors, artificial muscles and drug delivery.
摘要：
Biodegradable ethyl cellulose (EC) based microcapsules for controlled delivery of Argy Wormwood solution (AWS) was prepared in this study by emulsion-solvent evaporation method using ethyl acetate as solvent. Effects of emulsifier, AWS concentration, EC concentration and ratios of core to shell on the size of the microcapsules, encapsulation efficiency (EE) and drug content were also examined in this study. The increase in the AWS or EC concentrations resulted in enlargement of the microcapsules'. The drug loading increased from 23% to 48% as the AWP concentration was changed from 2 wt% to 10 wt%, showing that capsules were insensitive to the EC content. The drug loading and EE increased with increasing core to shell ratio. Also, the ratio was 70: 30 when the drug loading and EE deceased. SEM images of microcapsules showed uniform spherical structures with smooth surfaces, with a particle size range distribution between 100 nm(-2).m. The Core-shell and hetero-structures were confirmed using optical micrograph. Release rate for the AWS from the microcapsules was up to 98% within 5 h with pH 2. Comparatively, the release rate for the AWS decreased significantly to 72% and 35%, with pH of 6 and 10 respectively, showing a sustained and prolonged release.
摘要：
Self-supporting pH-responsive porous membranes of ethyl cellulose graft poly(2-(diethylamino)) ethyl methacrylate (EC-g-PDEAEMA) were prepared via the Non-Solvent-Induced Phase Separation (NIPS) process from mixtures of THF and DMF. The pH-responsive polymers (EC-g-PDEAEMA) were synthesized via Atom Transfer Radical Polymerization (ATRP) and evidenced by H-1 NMR spectroscopy and FT-IR spectra. The morphologies of the porous films were investigated by scanning electron microscopy (SEM) and polarized optical microscopy. These results indicated that the size and the number of pores in the membranes as well as the flux values were larger along with the decrease of THF content and "Open time." The optimum preparation conditions for microfiltration membrane were obtained.
作者机构：
[Sun, Xiuxuan; Wu, Qinglin] Louisiana State Univ, AgCtr, Sch Renewable Nat Resources, Baton Rouge, LA 70803 USA.;[Lee, Sunyoung] Korea Natl Inst Forest Sci, Dept Forest Prod, Seoul 130712, South Korea.;[Wu, Yiqiang; Qing, Yan] Cent South Univ Forestry & Technol, Coll Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
通讯机构：
[Wu, Qinglin] L;[Wu, Yiqiang] C;Louisiana State Univ, AgCtr, Sch Renewable Nat Resources, Baton Rouge, LA 70803 USA.;Cent South Univ Forestry & Technol, Coll Mat Sci & Engn, Changsha 410004, Hunan, Peoples R China.
摘要：
The influence of nanocellulose on oil well cement (OWC) properties is not known in detail, despite recent advances in nanocellulose technology and its related composite materials. The effect of cellulose nanofibers (CNFs) on flow, hydration, morphology, and strength of OWC was investigated using a range of spectroscopic methods coupled with rheological modelling and strength analysis. The Vom-Berg model showed the best fitting result of the rheology data. The addition of CNFs increased the yield stress of OWC slurry and degree of hydration value of hydrated CNF-OWC composites. The flexural strength of hydrated OWC samples was increased by 20.7% at the CNF/OWC ratio of 0.04 wt%. Excessive addition of CNFs into OWC matrix had a detrimental effect on the mechanical properties of hydrated CNF-OWC composites. This phenomenon was attributed to the aggregation of CNFs as observed through coupled morphological and elemental analysis. This study demonstrates a sustainable reinforcing nano-material for use in cement-based formulations.
作者机构：
[罗莎; 卿彦; Wu Y.; 田翠花] School of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, 410004, China;[蔡智勇] Forest Products Laboratory, USDA Forest Service, Madison, 53726, United States;School of Renewable Natural Resources, Louisiana State University, Baton Rouge, 70803, United States;[吴义强] School of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, 410004, China, School of Renewable Natural Resources, Louisiana State University, Baton Rouge, 70803, United States
通讯机构：
[Wu, Y.] S;School of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, China
